lkml.org 
[lkml]   [2021]   [Nov]   [10]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH v6 6/8] MIPS: DTS: CI20: Add DT nodes for HDMI setup
Date
From: Paul Boddie <paul@boddie.org.uk>

We need to hook up
* HDMI connector
* HDMI power regulator
* JZ4780_CLK_HDMI @ 27 MHz
* DDC pinmux
* HDMI and LCDC endpoint connections

Signed-off-by: Paul Boddie <paul@boddie.org.uk>
Signed-off-by: H. Nikolaus Schaller <hns@goldelico.com>
---
arch/mips/boot/dts/ingenic/ci20.dts | 73 +++++++++++++++++++++++++++--
1 file changed, 70 insertions(+), 3 deletions(-)

diff --git a/arch/mips/boot/dts/ingenic/ci20.dts b/arch/mips/boot/dts/ingenic/ci20.dts
index a688809beebca..a62557bede565 100644
--- a/arch/mips/boot/dts/ingenic/ci20.dts
+++ b/arch/mips/boot/dts/ingenic/ci20.dts
@@ -78,6 +78,18 @@ eth0_power: fixedregulator@0 {
enable-active-high;
};

+ hdmi_out: connector {
+ compatible = "hdmi-connector";
+ label = "HDMI OUT";
+ type = "a";
+
+ port {
+ hdmi_con: endpoint {
+ remote-endpoint = <&dw_hdmi_out>;
+ };
+ };
+ };
+
ir: ir {
compatible = "gpio-ir-receiver";
gpios = <&gpe 3 GPIO_ACTIVE_LOW>;
@@ -102,6 +114,17 @@ otg_power: fixedregulator@2 {
gpio = <&gpf 14 GPIO_ACTIVE_LOW>;
enable-active-high;
};
+
+ hdmi_power: fixedregulator@3 {
+ compatible = "regulator-fixed";
+
+ regulator-name = "hdmi_power";
+ regulator-min-microvolt = <5000000>;
+ regulator-max-microvolt = <5000000>;
+
+ gpio = <&gpa 25 GPIO_ACTIVE_LOW>;
+ enable-active-high;
+ };
};

&ext {
@@ -113,9 +136,9 @@ &cgu {
* Use the 32.768 kHz oscillator as the parent of the RTC for a higher
* precision.
*/
- assigned-clocks = <&cgu JZ4780_CLK_OTGPHY>, <&cgu JZ4780_CLK_RTC>;
- assigned-clock-parents = <0>, <&cgu JZ4780_CLK_RTCLK>;
- assigned-clock-rates = <48000000>;
+ assigned-clocks = <&cgu JZ4780_CLK_OTGPHY>, <&cgu JZ4780_CLK_RTC>, <&cgu JZ4780_CLK_HDMI>;
+ assigned-clock-parents = <0>, <&cgu JZ4780_CLK_RTCLK>, <0>;
+ assigned-clock-rates = <48000000>, <0>, <27000000>;
};

&tcu {
@@ -506,6 +529,12 @@ pins_i2c4: i2c4 {
bias-disable;
};

+ pins_hdmi_ddc: hdmi_ddc {
+ function = "hdmi-ddc";
+ groups = "hdmi-ddc";
+ bias-disable;
+ };
+
pins_nemc: nemc {
function = "nemc";
groups = "nemc-data", "nemc-cle-ale", "nemc-rd-we", "nemc-frd-fwe";
@@ -536,3 +565,41 @@ pins_mmc1: mmc1 {
bias-disable;
};
};
+
+&hdmi {
+ status = "okay";
+
+ pinctrl-names = "default";
+ pinctrl-0 = <&pins_hdmi_ddc>;
+
+ hdmi-5v-supply = <&hdmi_power>;
+
+ ports {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ port@0 {
+ reg = <0>;
+ dw_hdmi_in: endpoint {
+ remote-endpoint = <&lcd_out>;
+ };
+ };
+
+ port@1 {
+ reg = <1>;
+ dw_hdmi_out: endpoint {
+ remote-endpoint = <&hdmi_con>;
+ };
+ };
+ };
+};
+
+&lcdc0 {
+ status = "okay";
+
+ port {
+ lcd_out: endpoint {
+ remote-endpoint = <&dw_hdmi_in>;
+ };
+ };
+};
--
2.33.0
\
 
 \ /
  Last update: 2021-11-10 20:44    [W:0.133 / U:0.388 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site