lkml.org 
[lkml]   [2021]   [Nov]   [15]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
From
SubjectRe: [PATCH v6 5/8] MIPS: DTS: jz4780: Account for Synopsys HDMI driver and LCD controllers
Hi Nikolaus,

Le mer., nov. 10 2021 at 20:43:30 +0100, H. Nikolaus Schaller
<hns@goldelico.com> a écrit :
> From: Paul Boddie <paul@boddie.org.uk>
>
> A specialisation of the generic Synopsys HDMI driver is employed for
> JZ4780
> HDMI support. This requires a new driver, plus device tree and
> configuration
> modifications.
>
> Signed-off-by: Paul Boddie <paul@boddie.org.uk>
> Signed-off-by: H. Nikolaus Schaller <hns@goldelico.com>
> ---
> arch/mips/boot/dts/ingenic/jz4780.dtsi | 40
> ++++++++++++++++++++++++++
> 1 file changed, 40 insertions(+)
>
> diff --git a/arch/mips/boot/dts/ingenic/jz4780.dtsi
> b/arch/mips/boot/dts/ingenic/jz4780.dtsi
> index 9e34f433b9b58..98cc3360bbbb9 100644
> --- a/arch/mips/boot/dts/ingenic/jz4780.dtsi
> +++ b/arch/mips/boot/dts/ingenic/jz4780.dtsi
> @@ -424,6 +424,46 @@ i2c4: i2c@10054000 {
> status = "disabled";
> };
>
> + hdmi: hdmi@10180000 {
> + compatible = "ingenic,jz4780-dw-hdmi";
> + reg = <0x10180000 0x8000>;
> + reg-io-width = <4>;
> +
> + clocks = <&cgu JZ4780_CLK_AHB0>, <&cgu JZ4780_CLK_HDMI>;
> + clock-names = "iahb", "isfr";
> +
> + interrupt-parent = <&intc>;
> + interrupts = <3>;
> +
> + status = "disabled";
> + };
> +
> + lcdc0: lcdc0@13050000 {
> + compatible = "ingenic,jz4780-lcd";
> + reg = <0x13050000 0x1800>;
> +
> + clocks = <&cgu JZ4780_CLK_TVE>, <&cgu JZ4780_CLK_LCD0PIXCLK>;
> + clock-names = "lcd", "lcd_pclk";
> +
> + interrupt-parent = <&intc>;
> + interrupts = <31>;
> +
> + status = "disabled";
> + };
> +
> + lcdc1: lcdc1@130a0000 {
> + compatible = "ingenic,jz4780-lcd";
> + reg = <0x130a0000 0x1800>;
> +
> + clocks = <&cgu JZ4780_CLK_TVE>, <&cgu JZ4780_CLK_LCD1PIXCLK>;
> + clock-names = "lcd", "lcd_pclk";
> +
> + interrupt-parent = <&intc>;
> + interrupts = <31>;

You have the two LCD controllers wired to the same interrupt, that
can't be right.

From what I can read in the PM the LCD1 IRQ is number 23.

Cheers,
-Paul

> +
> + status = "disabled";
> + };
> +
> nemc: nemc@13410000 {
> compatible = "ingenic,jz4780-nemc", "simple-mfd";
> reg = <0x13410000 0x10000>;
> --
> 2.33.0
>


\
 
 \ /
  Last update: 2021-11-16 02:40    [W:0.203 / U:0.484 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site