Messages in this thread Patch in this message | | | From | Claudiu Beznea <> | Subject | [PATCH v2 2/2] mfd: atmel-flexcom: use resume_noirq | Date | Thu, 28 Oct 2021 16:51:38 +0300 |
| |
Flexcom IP embeds 3 other IPs: usart, i2c, spi and selects the operation mode (usart, i2c, spi) via mode register (FLEX_MR). On i2c bus there might be connected critical devices (like PMIC) which on suspend/resume should be suspended/resumed at the end/beginning. i2c uses .suspend_noirq/.resume_noirq for this kind of purposes. Align flexcom to use .resume_noirq as it should be resumed before the embedded IPs. Otherwise the embedded devices might behave badly.
Fixes: 7fdec11015c3 ("atmel_flexcom: Support resuming after a chip reset") Signed-off-by: Claudiu Beznea <claudiu.beznea@microchip.com> Tested-by: Codrin Ciubotariu <codrin.ciubotariu@microchip.com> Acked-by: Nicolas Ferre <nicolas.ferre@microchip.com> --- drivers/mfd/atmel-flexcom.c | 7 ++++--- 1 file changed, 4 insertions(+), 3 deletions(-)
diff --git a/drivers/mfd/atmel-flexcom.c b/drivers/mfd/atmel-flexcom.c index 962f66dc8813..559eb4d352b6 100644 --- a/drivers/mfd/atmel-flexcom.c +++ b/drivers/mfd/atmel-flexcom.c @@ -87,7 +87,7 @@ static const struct of_device_id atmel_flexcom_of_match[] = { }; MODULE_DEVICE_TABLE(of, atmel_flexcom_of_match); -static int __maybe_unused atmel_flexcom_resume(struct device *dev) +static int __maybe_unused atmel_flexcom_resume_noirq(struct device *dev) { struct atmel_flexcom *ddata = dev_get_drvdata(dev); int err; @@ -105,8 +105,9 @@ static int __maybe_unused atmel_flexcom_resume(struct device *dev) return 0; } -static SIMPLE_DEV_PM_OPS(atmel_flexcom_pm_ops, NULL, - atmel_flexcom_resume); +static const struct dev_pm_ops atmel_flexcom_pm_ops = { + .resume_noirq = atmel_flexcom_resume_noirq, +}; static struct platform_driver atmel_flexcom_driver = { .probe = atmel_flexcom_probe, -- 2.33.0
| |