lkml.org 
[lkml]   [2021]   [Oct]   [21]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
From
SubjectRE: [PATCH v5 0/2] gpio: mlxbf2: Introduce proper interrupt handling
Date
On Fri, Oct 15, 2021 at 6:48 PM Asmaa Mnebhi <asmaa@nvidia.com> wrote:
>
> This is a follow up on a discussion regarding proper handling of GPIO
> interrupts within the gpio-mlxbf2.c driver.
>
> Link to discussion:
> https://lore.kernel.org/netdev/20210816115953.72533-7-andriy.shevchenk
> o@linux.intel.com/T/
>
> Patch 1 adds support to a GPIO IRQ handler in gpio-mlxbf2.c.
> Patch 2 is a follow up removal of custom GPIO IRQ handling from the
> mlxbf_gige driver and replacing it with a simple IRQ request. The ACPI
> table for the mlxbf_gige driver is responsible for instantiating the
> PHY GPIO interrupt via GpioInt.
>
> Andy Shevchenko, could you please review this patch series.
> David Miller, could you please ack the changes in the mlxbf_gige
> driver.
>
> v5 vs. v4 patch:
> - Remove a fix which check if bgpio_init has failed.
> This fix should in a separate patch targeting the stable
> branch.
>

Hi Asmaa! Did you send this fix? I can't find it in my inbox or on patchwork.

Hi Bart! I haven't that separate patch yet. I will send it shortly.

\
 
 \ /
  Last update: 2021-10-21 20:11    [W:0.150 / U:0.540 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site