Messages in this thread | | | Subject | Re: [PATCH v3 06/13] net: phy: add qca8081 read_status | From | Jie Luo <> | Date | Tue, 19 Oct 2021 20:10:15 +0800 |
| |
On 10/19/2021 5:42 AM, Andrew Lunn wrote: >> +static int qca808x_read_status(struct phy_device *phydev) >> +{ >> + int ret; >> + >> + ret = phy_read_mmd(phydev, MDIO_MMD_AN, MDIO_AN_10GBT_STAT); >> + if (ret < 0) >> + return ret; >> + >> + linkmode_mod_bit(ETHTOOL_LINK_MODE_2500baseT_Full_BIT, phydev->lp_advertising, >> + ret & MDIO_AN_10GBT_STAT_LP2_5G); >> + > Could genphy_c45_read_lpa() be used here? > > Andrew
Hi Andrew,
Thanks for the comments, the MDIO_STAT1 of PHY does not follow the standard, bit0~bit6 of MDIO_STAT1 are
always 0, genphy_c45_read_lpa can't be used.
| |