lkml.org 
[lkml]   [2021]   [Oct]   [17]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH v4] dt-bindings: net: nfc: nxp,pn544: Convert txt bindings to yaml
Date
Convert bindings for NXP PN544 NFC driver to YAML syntax.

Signed-off-by: David Heidelberg <david@ixit.cz>
---
v2
- Krzysztof is a maintainer
- pintctrl dropped
- 4 space indent for example
- nfc node name
v3
- remove whole pinctrl
v4
- drop clock-frequency, which is inherited by i2c bus

.../bindings/net/nfc/nxp,pn544.yaml | 56 +++++++++++++++++++
.../devicetree/bindings/net/nfc/pn544.txt | 33 -----------
2 files changed, 56 insertions(+), 33 deletions(-)
create mode 100644 Documentation/devicetree/bindings/net/nfc/nxp,pn544.yaml
delete mode 100644 Documentation/devicetree/bindings/net/nfc/pn544.txt

diff --git a/Documentation/devicetree/bindings/net/nfc/nxp,pn544.yaml b/Documentation/devicetree/bindings/net/nfc/nxp,pn544.yaml
new file mode 100644
index 000000000000..4592d1194a71
--- /dev/null
+++ b/Documentation/devicetree/bindings/net/nfc/nxp,pn544.yaml
@@ -0,0 +1,56 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/net/nfc/nxp,pn544.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: NXP Semiconductors PN544 NFC Controller
+
+maintainers:
+ - Krzysztof Kozlowski <krzysztof.kozlowski@canonical.com>
+
+properties:
+ compatible:
+ const: nxp,pn544-i2c
+
+ reg:
+ maxItems: 1
+
+ interrupts:
+ maxItems: 1
+
+ enable-gpios:
+ description: Output GPIO pin used for enabling/disabling the PN544
+
+ firmware-gpios:
+ description: Output GPIO pin used to enter firmware download mode
+
+required:
+ - compatible
+ - reg
+ - interrupts
+ - enable-gpios
+ - firmware-gpios
+
+additionalProperties: false
+
+examples:
+ - |
+ #include <dt-bindings/gpio/gpio.h>
+ #include <dt-bindings/interrupt-controller/irq.h>
+
+ i2c {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ nfc@28 {
+ compatible = "nxp,pn544-i2c";
+ reg = <0x28>;
+
+ interrupt-parent = <&gpio1>;
+ interrupts = <17 IRQ_TYPE_LEVEL_HIGH>;
+
+ enable-gpios = <&gpio3 21 GPIO_ACTIVE_HIGH>;
+ firmware-gpios = <&gpio3 19 GPIO_ACTIVE_HIGH>;
+ };
+ };
diff --git a/Documentation/devicetree/bindings/net/nfc/pn544.txt b/Documentation/devicetree/bindings/net/nfc/pn544.txt
deleted file mode 100644
index 2bd82562ce8e..000000000000
--- a/Documentation/devicetree/bindings/net/nfc/pn544.txt
+++ /dev/null
@@ -1,33 +0,0 @@
-* NXP Semiconductors PN544 NFC Controller
-
-Required properties:
-- compatible: Should be "nxp,pn544-i2c".
-- clock-frequency: I²C work frequency.
-- reg: address on the bus
-- interrupts: GPIO interrupt to which the chip is connected
-- enable-gpios: Output GPIO pin used for enabling/disabling the PN544
-- firmware-gpios: Output GPIO pin used to enter firmware download mode
-
-Optional SoC Specific Properties:
-- pinctrl-names: Contains only one value - "default".
-- pintctrl-0: Specifies the pin control groups used for this controller.
-
-Example (for ARM-based BeagleBone with PN544 on I2C2):
-
-&i2c2 {
-
-
- pn544: pn544@28 {
-
- compatible = "nxp,pn544-i2c";
-
- reg = <0x28>;
- clock-frequency = <400000>;
-
- interrupt-parent = <&gpio1>;
- interrupts = <17 IRQ_TYPE_LEVEL_HIGH>;
-
- enable-gpios = <&gpio3 21 GPIO_ACTIVE_HIGH>;
- firmware-gpios = <&gpio3 19 GPIO_ACTIVE_HIGH>;
- };
-};
--
2.33.0
\
 
 \ /
  Last update: 2021-10-17 18:20    [W:5.975 / U:0.068 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site