lkml.org 
[lkml]   [2021]   [Oct]   [12]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH v2 1/2] dt-bindings: mtd: spi-nor: Add output-driver-strength property
Date
This property is for optimizing output voltage impedance and is
specific to each board. It overwrites the default set by the flash
device. Various flash devices support different impedances.

Signed-off-by: Alexander Stein <alexander.stein@ew.tq-group.com>
---
Changes in v2:
* Updated the property description and the commit message accordingly

Documentation/devicetree/bindings/mtd/jedec,spi-nor.yaml | 8 ++++++++
1 file changed, 8 insertions(+)

diff --git a/Documentation/devicetree/bindings/mtd/jedec,spi-nor.yaml b/Documentation/devicetree/bindings/mtd/jedec,spi-nor.yaml
index ed590d7c6e37..4c3c506a8853 100644
--- a/Documentation/devicetree/bindings/mtd/jedec,spi-nor.yaml
+++ b/Documentation/devicetree/bindings/mtd/jedec,spi-nor.yaml
@@ -72,6 +72,14 @@ properties:
be used on such systems, to denote the absence of a reliable reset
mechanism.

+ output-driver-strength:
+ $ref: /schemas/types.yaml#/definitions/uint32
+ description:
+ Output driver strength in ohms which optimizes the impedance at Vcc/2
+ output voltage. This property overwrites the default set by the flash
+ device. This is board specific and should be determined by the
+ manufacturer. Various flash devices support different impedances.
+
label: true

partitions:
--
2.25.1
\
 
 \ /
  Last update: 2021-10-12 08:19    [W:0.039 / U:0.912 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site