lkml.org 
[lkml]   [2021]   [Oct]   [12]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
From
SubjectRe: [PATCH 09/22] PCI: aardvark: Use SET_PCI_ERROR_RESPONSE() when device not found
On Tue, Oct 12, 2021 at 09:29:28PM +0530, Naveen Naidu wrote:
> On 11/10, Pali Rohár wrote:
> > On Monday 11 October 2021 23:55:35 Naveen Naidu wrote:
> > > On 11/10, Pali Rohár wrote:
> > > > On Monday 11 October 2021 23:26:33 Naveen Naidu wrote:
> > > > > An MMIO read from a PCI device that doesn't exist or doesn't respond
> > > > > causes a PCI error. There's no real data to return to satisfy the
> > > > > CPU read, so most hardware fabricates ~0 data.
> > > > >
> > > > > Use SET_PCI_ERROR_RESPONSE() to set the error response, when a faulty
> > > > > read occurs.
> > > > >
> > > > > This helps unify PCI error response checking and make error check
> > > > > consistent and easier to find.
> > > > >
> > > > > Compile tested only.
> > > > >
> > > > > Signed-off-by: Naveen Naidu <naveennaidu479@gmail.com>
> > > > > ---
> > > > > drivers/pci/controller/pci-aardvark.c | 8 ++++----
> > > > > 1 file changed, 4 insertions(+), 4 deletions(-)
> > > > >
> > > > > diff --git a/drivers/pci/controller/pci-aardvark.c b/drivers/pci/controller/pci-aardvark.c
> > > > > index 596ebcfcc82d..dc2f820ef55f 100644
> > > > > --- a/drivers/pci/controller/pci-aardvark.c
> > > > > +++ b/drivers/pci/controller/pci-aardvark.c
> > > > > @@ -894,7 +894,7 @@ static int advk_pcie_rd_conf(struct pci_bus *bus, u32 devfn,
> > > > > int ret;
> > > > >
> > > > > if (!advk_pcie_valid_device(pcie, bus, devfn)) {
> > > > > - *val = 0xffffffff;
> > > > > + SET_PCI_ERROR_RESPONSE(val);
> > > >
> > > > Hello! Now I'm looking at this macro, and should not it depends on
> > > > "size" argument? If doing 8-bit or 16-bit read operation then should not
> > > > it rather sets only low 8 bits or low 16 bits to ones?

> > Function itself is declared as:
> >
> > static int advk_pcie_rd_conf(struct pci_bus *bus, u32 devfn, int where, int size, u32 *val);
> >
> > And in "size" argument is stored number of bytes, kind of read operation
> > (read byte, read word, read dword). In *val is then stored read value.
> > For byte operation, just low 8 bits in *val variable are set.
> >
> > Because *val is u32 it means that typeof(*val) is always 4 independently
> > of the "size" argument.
> >
> > For example other project U-Boot has also pci-aardvark.c driver and
> > U-Boot has for (probably same) purpose pci_get_ff() macro, see:
> > https://source.denx.de/u-boot/u-boot/-/blob/v2021.10/drivers/pci/pci-aardvark.c#L367
> >
> > I'm not saying if current approach to always sets 0xffffffff
> > (independently of "size" argument) is correct or not as I do not know
> > it too! I'm just giving example that this PCI code has very similar
> > implementation of other project (U-Boot) which sets number of ones based
> > on the size argument.

I don't think there's an issue here. advk_pcie_rd_conf() can set the
whole u32 to 0xffffffff regardless of the "size" value because
pci_bus_read_config_byte() and pci_bus_read_config_word() extract out
the part they need:

res = bus->ops->read(bus, devfn, pos, len, &data); \
*value = (type)data; \

where "type" is u8 or u16 (this is hard to grep for; it's in the
PCI_OP_READ() macro in drivers/pci/access.c).

> I am not sure too, if we would like to have something like pci_get_ff()
> which sets the return mask based on the size.

I'd like to see how pci_get_ff() works because this is potentially a
widespread, invasive change and it's always better to copy a good
existing design than to make up something new.

> > Anyway, I very like this your idea to have a macro which purpose is to
> > explicitly indicate error during config read operation! And to unify all
> > drivers to use same style for signalling config read error.

I definitely think there's a lot of value in making this consistent
*somehow*, so thanks for working on this!

Bjorn

\
 
 \ /
  Last update: 2021-10-13 04:13    [W:0.075 / U:0.696 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site