lkml.org 
[lkml]   [2021]   [Oct]   [12]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH v3 17/17] ARM: dts: ls1021a-tsn: use generic "jedec,spi-nor" compatible for flash
Date
We cannot list all the possible chips used in different board revisions,
just use the generic "jedec,spi-nor" compatible instead. This also
fixes dtbs_check error:
['jedec,spi-nor', 's25fl256s1', 's25fl512s'] is too long

Signed-off-by: Li Yang <leoyang.li@nxp.com>
Reviewed-by: Kuldeep Singh <kuldeep.singh@nxp.com>
---
arch/arm/boot/dts/ls1021a-tsn.dts | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/arch/arm/boot/dts/ls1021a-tsn.dts b/arch/arm/boot/dts/ls1021a-tsn.dts
index 8005efc5c812..ff0ffb22768b 100644
--- a/arch/arm/boot/dts/ls1021a-tsn.dts
+++ b/arch/arm/boot/dts/ls1021a-tsn.dts
@@ -251,7 +251,7 @@ &qspi {

flash@0 {
/* Rev. A uses 64MB flash, Rev. B & C use 32MB flash */
- compatible = "jedec,spi-nor", "s25fl256s1", "s25fl512s";
+ compatible = "jedec,spi-nor";
spi-max-frequency = <20000000>;
#address-cells = <1>;
#size-cells = <1>;
--
2.25.1
\
 
 \ /
  Last update: 2021-10-13 02:07    [W:0.071 / U:0.836 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site