lkml.org 
[lkml]   [2021]   [Oct]   [12]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH v3 03/17] ARM: dts: ls1021a: change dma channels order to match schema
Date
Although the ordering of DMA channels was not relevant in the txt binding,
it is defined as ordered in the converted yaml schema. Update the dts
to match the order.

Signed-off-by: Li Yang <leoyang.li@nxp.com>
---
arch/arm/boot/dts/ls1021a.dtsi | 12 ++++++------
1 file changed, 6 insertions(+), 6 deletions(-)

diff --git a/arch/arm/boot/dts/ls1021a.dtsi b/arch/arm/boot/dts/ls1021a.dtsi
index 77f983b589fa..960de957f0b4 100644
--- a/arch/arm/boot/dts/ls1021a.dtsi
+++ b/arch/arm/boot/dts/ls1021a.dtsi
@@ -395,8 +395,8 @@ i2c0: i2c@2180000 {
reg = <0x0 0x2180000 0x0 0x10000>;
interrupts = <GIC_SPI 88 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&clockgen 4 1>;
- dma-names = "tx", "rx";
- dmas = <&edma0 1 39>, <&edma0 1 38>;
+ dma-names = "rx", "tx";
+ dmas = <&edma0 1 38>, <&edma0 1 39>;
status = "disabled";
};

@@ -407,8 +407,8 @@ i2c1: i2c@2190000 {
reg = <0x0 0x2190000 0x0 0x10000>;
interrupts = <GIC_SPI 89 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&clockgen 4 1>;
- dma-names = "tx", "rx";
- dmas = <&edma0 1 37>, <&edma0 1 36>;
+ dma-names = "rx", "tx";
+ dmas = <&edma0 1 36>, <&edma0 1 37>;
status = "disabled";
};

@@ -419,8 +419,8 @@ i2c2: i2c@21a0000 {
reg = <0x0 0x21a0000 0x0 0x10000>;
interrupts = <GIC_SPI 90 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&clockgen 4 1>;
- dma-names = "tx", "rx";
- dmas = <&edma0 1 35>, <&edma0 1 34>;
+ dma-names = "rx", "tx";
+ dmas = <&edma0 1 34>, <&edma0 1 35>;
status = "disabled";
};

--
2.25.1
\
 
 \ /
  Last update: 2021-10-13 02:07    [W:0.108 / U:2.792 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site