[lkml]   [2021]   [Jan]   [7]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
Messages in this thread
Patch in this message
Subject[PATCH 5.10 07/20] Bluetooth: Fix attempting to set RPA timeout when unsupported
From: Edward Vear <>

commit a31489d2a368d2f9225ed6a6f595c63bc7d10de8 upstream.

During controller initialization, an LE Set RPA Timeout command is sent
to the controller if supported. However, the value checked to determine
if the command is supported is incorrect. Page 1921 of the Bluetooth
Core Spec v5.2 shows that bit 2 of octet 35 of the Supported_Commands
field corresponds to the LE Set RPA Timeout command, but currently
bit 6 of octet 35 is checked. This patch checks the correct value

This issue led to the error seen in the following btmon output during
initialization of an adapter (rtl8761b) and prevented initialization
from completing.

< HCI Command: LE Set Resolvable Private Address Timeout (0x08|0x002e) plen 2
Timeout: 900 seconds
> HCI Event: Command Complete (0x0e) plen 4
LE Set Resolvable Private Address Timeout (0x08|0x002e) ncmd 2
Status: Unsupported Remote Feature / Unsupported LMP Feature (0x1a)
= Close Index: 00:E0:4C:6B:E5:03

The error did not appear when running with this patch.

Signed-off-by: Edward Vear <>
Signed-off-by: Marcel Holtmann <>
Signed-off-by: Johan Hedberg <>
Cc: Sudip Mukherjee <>
Signed-off-by: Greg Kroah-Hartman <>

net/bluetooth/hci_core.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)

--- a/net/bluetooth/hci_core.c
+++ b/net/bluetooth/hci_core.c
@@ -763,7 +763,7 @@ static int hci_init3_req(struct hci_requ
hci_req_add(req, HCI_OP_LE_CLEAR_RESOLV_LIST, 0, NULL);

- if (hdev->commands[35] & 0x40) {
+ if (hdev->commands[35] & 0x04) {
__le16 rpa_timeout = cpu_to_le16(hdev->rpa_timeout);

/* Set RPA timeout */

 \ /
  Last update: 2021-01-07 15:42    [W:0.099 / U:0.228 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site