lkml.org 
[lkml]   [2021]   [Jan]   [7]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH 5.10 03/20] rtc: pcf2127: move watchdog initialisation to a separate function
Date
From: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>

commit 5d78533a0c53af9659227c803df944ba27cd56e0 upstream.

The obvious advantages are:

- The linker can drop the watchdog functions if CONFIG_WATCHDOG is off.
- All watchdog stuff grouped together with only a single function call
left in generic code.
- Watchdog register is only read when it is actually used.
- Less #ifdefery

Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
Link: https://lore.kernel.org/r/20200924105256.18162-2-u.kleine-koenig@pengutronix.de
Cc: Rasmus Villemoes <rasmus.villemoes@prevas.dk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
drivers/rtc/rtc-pcf2127.c | 56 +++++++++++++++++++++++++---------------------
1 file changed, 31 insertions(+), 25 deletions(-)

--- a/drivers/rtc/rtc-pcf2127.c
+++ b/drivers/rtc/rtc-pcf2127.c
@@ -331,6 +331,36 @@ static const struct watchdog_ops pcf2127
.set_timeout = pcf2127_wdt_set_timeout,
};

+static int pcf2127_watchdog_init(struct device *dev, struct pcf2127 *pcf2127)
+{
+ u32 wdd_timeout;
+ int ret;
+
+ if (!IS_ENABLED(CONFIG_WATCHDOG))
+ return 0;
+
+ pcf2127->wdd.parent = dev;
+ pcf2127->wdd.info = &pcf2127_wdt_info;
+ pcf2127->wdd.ops = &pcf2127_watchdog_ops;
+ pcf2127->wdd.min_timeout = PCF2127_WD_VAL_MIN;
+ pcf2127->wdd.max_timeout = PCF2127_WD_VAL_MAX;
+ pcf2127->wdd.timeout = PCF2127_WD_VAL_DEFAULT;
+ pcf2127->wdd.min_hw_heartbeat_ms = 500;
+ pcf2127->wdd.status = WATCHDOG_NOWAYOUT_INIT_STATUS;
+
+ watchdog_set_drvdata(&pcf2127->wdd, pcf2127);
+
+ /* Test if watchdog timer is started by bootloader */
+ ret = regmap_read(pcf2127->regmap, PCF2127_REG_WD_VAL, &wdd_timeout);
+ if (ret)
+ return ret;
+
+ if (wdd_timeout)
+ set_bit(WDOG_HW_RUNNING, &pcf2127->wdd.status);
+
+ return devm_watchdog_register_device(dev, &pcf2127->wdd);
+}
+
/* Alarm */
static int pcf2127_rtc_read_alarm(struct device *dev, struct rtc_wkalrm *alrm)
{
@@ -532,7 +562,6 @@ static int pcf2127_probe(struct device *
int alarm_irq, const char *name, bool has_nvmem)
{
struct pcf2127 *pcf2127;
- u32 wdd_timeout;
int ret = 0;

dev_dbg(dev, "%s\n", __func__);
@@ -571,17 +600,6 @@ static int pcf2127_probe(struct device *
pcf2127->rtc->ops = &pcf2127_rtc_alrm_ops;
}

- pcf2127->wdd.parent = dev;
- pcf2127->wdd.info = &pcf2127_wdt_info;
- pcf2127->wdd.ops = &pcf2127_watchdog_ops;
- pcf2127->wdd.min_timeout = PCF2127_WD_VAL_MIN;
- pcf2127->wdd.max_timeout = PCF2127_WD_VAL_MAX;
- pcf2127->wdd.timeout = PCF2127_WD_VAL_DEFAULT;
- pcf2127->wdd.min_hw_heartbeat_ms = 500;
- pcf2127->wdd.status = WATCHDOG_NOWAYOUT_INIT_STATUS;
-
- watchdog_set_drvdata(&pcf2127->wdd, pcf2127);
-
if (has_nvmem) {
struct nvmem_config nvmem_cfg = {
.priv = pcf2127,
@@ -611,19 +629,7 @@ static int pcf2127_probe(struct device *
return ret;
}

- /* Test if watchdog timer is started by bootloader */
- ret = regmap_read(pcf2127->regmap, PCF2127_REG_WD_VAL, &wdd_timeout);
- if (ret)
- return ret;
-
- if (wdd_timeout)
- set_bit(WDOG_HW_RUNNING, &pcf2127->wdd.status);
-
-#ifdef CONFIG_WATCHDOG
- ret = devm_watchdog_register_device(dev, &pcf2127->wdd);
- if (ret)
- return ret;
-#endif /* CONFIG_WATCHDOG */
+ pcf2127_watchdog_init(dev, pcf2127);

/*
* Disable battery low/switch-over timestamp and interrupts.

\
 
 \ /
  Last update: 2021-01-07 15:38    [W:0.161 / U:0.260 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site