lkml.org 
[lkml]   [2021]   [Jan]   [7]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH] mmc: sdhci-brcmstb: Fix mmc timeout errors on S5 suspend
Date
Commit e7b5d63a82fe ("mmc: sdhci-brcmstb: Add shutdown callback")
that added a shutdown callback to the diver, is causing "mmc timeout"
errors on S5 suspend. The problem was that the "remove" was queuing
additional MMC commands after the "shutdown" and these caused
timeouts as the MMC queues were cleaned up for "remove". The
shutdown callback will be changed to calling sdhci-pltfm_suspend
which should get better power savings because the clocks will be
shutdown.

Fixes: e7b5d63a82fe ("mmc: sdhci-brcmstb: Add shutdown callback")
Signed-off-by: Al Cooper <alcooperx@gmail.com>
---
drivers/mmc/host/sdhci-brcmstb.c | 6 +-----
1 file changed, 1 insertion(+), 5 deletions(-)

diff --git a/drivers/mmc/host/sdhci-brcmstb.c b/drivers/mmc/host/sdhci-brcmstb.c
index bbf3496f4495..f9780c65ebe9 100644
--- a/drivers/mmc/host/sdhci-brcmstb.c
+++ b/drivers/mmc/host/sdhci-brcmstb.c
@@ -314,11 +314,7 @@ static int sdhci_brcmstb_probe(struct platform_device *pdev)

static void sdhci_brcmstb_shutdown(struct platform_device *pdev)
{
- int ret;
-
- ret = sdhci_pltfm_unregister(pdev);
- if (ret)
- dev_err(&pdev->dev, "failed to shutdown\n");
+ sdhci_pltfm_suspend(&pdev->dev);
}

MODULE_DEVICE_TABLE(of, sdhci_brcm_of_match);
--
2.17.1
\
 
 \ /
  Last update: 2021-01-07 23:17    [W:0.065 / U:0.036 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site