lkml.org 
[lkml]   [2021]   [Jan]   [6]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH] mmc: sdhci-pci-gli: Add a switch to enable/disable CQHCI support
Date
Add a vendor-specific bit named GLI_9763E_MB_ERP_ON at the bit7 of
register 888h to decide whether to enhance random R/W performance
of GL9763E. CQHCI support will be enabled if and only if the bit is
set and the GLI_9763E_MB_CMQ_OFF bit is not set.

Signed-off-by: Renius Chen <reniuschengl@gmail.com>
---
drivers/mmc/host/sdhci-pci-gli.c | 4 +++-
1 file changed, 3 insertions(+), 1 deletion(-)

diff --git a/drivers/mmc/host/sdhci-pci-gli.c b/drivers/mmc/host/sdhci-pci-gli.c
index b85edd62e7f0..c6a107d7c742 100644
--- a/drivers/mmc/host/sdhci-pci-gli.c
+++ b/drivers/mmc/host/sdhci-pci-gli.c
@@ -84,6 +84,7 @@
#define GLI_9763E_VHS_REV_W 0x2
#define PCIE_GLI_9763E_MB 0x888
#define GLI_9763E_MB_CMDQ_OFF BIT(19)
+#define GLI_9763E_MB_ERP_ON BIT(7)
#define PCIE_GLI_9763E_SCR 0x8E0
#define GLI_9763E_SCR_AXI_REQ BIT(9)

@@ -814,7 +815,8 @@ static int gli_probe_slot_gl9763e(struct sdhci_pci_slot *slot)

pci_read_config_dword(pdev, PCIE_GLI_9763E_MB, &value);
if (!(value & GLI_9763E_MB_CMDQ_OFF))
- host->mmc->caps2 |= MMC_CAP2_CQE | MMC_CAP2_CQE_DCMD;
+ if (value & GLI_9763E_MB_ERP_ON)
+ host->mmc->caps2 |= MMC_CAP2_CQE | MMC_CAP2_CQE_DCMD;

gli_pcie_enable_msi(slot);
host->mmc_host_ops.hs400_enhanced_strobe =
--
2.27.0
\
 
 \ /
  Last update: 2021-01-06 09:55    [W:0.041 / U:0.352 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site