lkml.org 
[lkml]   [2021]   [Jan]   [28]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
From
SubjectRe: [PATCH] watchdog: qcom: Remove incorrect usage of QCOM_WDT_ENABLE_IRQ
On 2021-01-28 07:03, Stephen Boyd wrote:
> Quoting Sai Prakash Ranjan (2021-01-26 07:02:41)
>> As per register documentation, QCOM_WDT_ENABLE_IRQ which is BIT(1)
>> of watchdog control register is wakeup interrupt enable bit and
>> not related to bark interrupt at all, BIT(0) is used for that.
>> So remove incorrect usage of this bit when supporting bark irq for
>> pre-timeout notification. Currently with this bit set and bark
>> interrupt specified, pre-timeout notification and/or watchdog
>> reset/bite does not occur.
>
> It looks like the QCOM_WDT_ENABLE_IRQ bit is to catch a problem where a
> pending irq is unmasked but the watchdog irq isn't handled in time? So
> some sort of irq storm?
>

In sleep mode, this bit is used to enable unmasked irq to wakeup
watchdog timer. The watchdog counter can be brought out of
reset either by writing 1 to WDOG_RESET or setting this BIT(1) to 1.

>>
>> Fixes: 36375491a439 ("watchdog: qcom: support pre-timeout when the
>> bark irq is available")
>> Cc: stable@vger.kernel.org
>> Signed-off-by: Sai Prakash Ranjan <saiprakash.ranjan@codeaurora.org>
>> ---
>
> Reviewed-by: Stephen Boyd <swboyd@chromium.org>
>

Thanks,
Sai

--
QUALCOMM INDIA, on behalf of Qualcomm Innovation Center, Inc. is a
member
of Code Aurora Forum, hosted by The Linux Foundation

\
 
 \ /
  Last update: 2021-01-28 12:05    [W:0.106 / U:0.264 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site