lkml.org 
[lkml]   [2021]   [Jan]   [28]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH 1/2] dt-bindings: phy-imx8mq-usb: add reset-gpios property
Date
Add an optional GPIO in the dtb description that will
be used to reset the connected hub (if any).

Signed-off-by: Adrien Grassein <adrien.grassein@gmail.com>
---
Documentation/devicetree/bindings/phy/fsl,imx8mq-usb-phy.txt | 1 +
1 file changed, 1 insertion(+)

diff --git a/Documentation/devicetree/bindings/phy/fsl,imx8mq-usb-phy.txt b/Documentation/devicetree/bindings/phy/fsl,imx8mq-usb-phy.txt
index 7c70f2ad9942..6ee2b42e0f22 100644
--- a/Documentation/devicetree/bindings/phy/fsl,imx8mq-usb-phy.txt
+++ b/Documentation/devicetree/bindings/phy/fsl,imx8mq-usb-phy.txt
@@ -9,6 +9,7 @@ Required properties:

Optional properties:
- vbus-supply: A phandle to the regulator for USB VBUS.
+- reset-gpios: A phandle to the reset signal of the connected hub (if any).

Example:
usb3_phy0: phy@381f0040 {
--
2.25.1
\
 
 \ /
  Last update: 2021-01-28 23:15    [W:0.034 / U:3.152 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site