lkml.org 
[lkml]   [2021]   [Jan]   [25]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
Subject[PATCH] regulator: pf8x00: set ramp_delay for bucks
From
Date
This patch sets ramp_delay for bucks to the max value given by the
datasheet.

Signed-off-by: Christoph Fritz <chf.fritz@googlemail.com>
Reviewed-by: Adrien Grassein <adrien.grassein@gmail.com>
---
drivers/regulator/pf8x00-regulator.c | 2 ++
1 file changed, 2 insertions(+)

diff --git a/drivers/regulator/pf8x00-regulator.c b/drivers/regulator/pf8x00-regulator.c
index 1e5582d73405..edf5c88bf43e 100644
--- a/drivers/regulator/pf8x00-regulator.c
+++ b/drivers/regulator/pf8x00-regulator.c
@@ -351,6 +351,7 @@ static const struct regulator_ops pf8x00_vsnvs_ops = {
.type = REGULATOR_VOLTAGE, \
.id = PF8X00_BUCK ## _id, \
.owner = THIS_MODULE, \
+ .ramp_delay = 19000, \
.linear_ranges = pf8x00_sw1_to_6_voltages, \
.n_linear_ranges = \
ARRAY_SIZE(pf8x00_sw1_to_6_voltages), \
@@ -381,6 +382,7 @@ static const struct regulator_ops pf8x00_vsnvs_ops = {
.type = REGULATOR_VOLTAGE, \
.id = PF8X00_BUCK7, \
.owner = THIS_MODULE, \
+ .ramp_delay = 19000, \
.volt_table = voltages, \
.vsel_reg = (base) + SW_RUN_VOLT, \
.vsel_mask = 0xff, \
--
2.29.2

\
 
 \ /
  Last update: 2021-01-25 17:16    [W:0.036 / U:0.044 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site