lkml.org 
[lkml]   [2021]   [Jan]   [21]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH 1/1] serial: stm32: improve platform_get_irq condition handling in init_port
Date
Replace "ret" variable by "irq" variable from platform_get_irq condition
handling in stm32_init_port as suggested by Jiri in "STM32 uart cleanup and
improvement" series review.
This change will prevent port->irq to be unexpectly modified by a potential
change of "ret" value introduced by a new patch.

Suggested-by: Jiri Slaby <jirislaby@kernel.org>
Signed-off-by: Erwan Le Ray <erwan.leray@foss.st.com>

diff --git a/drivers/tty/serial/stm32-usart.c b/drivers/tty/serial/stm32-usart.c
index 6a9a5ef5f5ba..dde6d526362d 100644
--- a/drivers/tty/serial/stm32-usart.c
+++ b/drivers/tty/serial/stm32-usart.c
@@ -981,11 +981,11 @@ static int stm32_usart_init_port(struct stm32_port *stm32port,
{
struct uart_port *port = &stm32port->port;
struct resource *res;
- int ret;
+ int ret, irq;

- ret = platform_get_irq(pdev, 0);
- if (ret <= 0)
- return ret ? : -ENODEV;
+ irq = platform_get_irq(pdev, 0);
+ if (irq <= 0)
+ return irq ? : -ENODEV;

port->iotype = UPIO_MEM;
port->flags = UPF_BOOT_AUTOCONF;
@@ -993,7 +993,7 @@ static int stm32_usart_init_port(struct stm32_port *stm32port,
port->dev = &pdev->dev;
port->fifosize = stm32port->info->cfg.fifosize;
port->has_sysrq = IS_ENABLED(CONFIG_SERIAL_STM32_CONSOLE);
- port->irq = ret;
+ port->irq = irq;
port->rs485_config = stm32_usart_config_rs485;

ret = stm32_usart_init_rs485(port, pdev);
--
2.17.1
\
 
 \ /
  Last update: 2021-01-21 15:27    [W:0.021 / U:0.296 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site