lkml.org 
[lkml]   [2021]   [Jan]   [21]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH v3] USB: serial: cp210x: Fix error 32 when hardware flow control is enabled.
Date
Fix error 32 returned by CP210X_SET_MHS when hardware flow control is enabled.

The root cause of error 32 is that user application (CoolTerm, linux-serial-test)
opened cp210x device with hardware flow control then attempt to control RTS/DTR pins.
In hardware flow control, RTS/DTR pins will be controlled by hardware only,
any attempt to control those pins will cause error 32 from the device.
This fix will block MHS command(command to control RTS/DTR pins) to the device
if hardware flow control is being used.

Signed-off-by: Pho Tran <pho.tran@silabs.com>
---
01/19/2021: Patch v2 Modified based on comment from Johan Hovold <johan@kernel.org>
and Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
drivers/usb/serial/cp210x.c | 7 ++++++-
1 file changed, 6 insertions(+), 1 deletion(-)

diff --git a/drivers/usb/serial/cp210x.c b/drivers/usb/serial/cp210x.c
index fbb10dfc56e3..5b6bbda2b424 100644
--- a/drivers/usb/serial/cp210x.c
+++ b/drivers/usb/serial/cp210x.c
@@ -1204,7 +1204,12 @@ static int cp210x_tiocmset(struct tty_struct *tty,
unsigned int set, unsigned int clear)
{
struct usb_serial_port *port = tty->driver_data;
- return cp210x_tiocmset_port(port, set, clear);
+ if (C_CRTSCTS(tty))
+
+ /* Don't send SET_MHS command if device in hardware flow control mode. */
+ return 0;
+ else
+ return cp210x_tiocmset_port(port, set, clear);
}

static int cp210x_tiocmset_port(struct usb_serial_port *port,
--
2.17.1
\
 
 \ /
  Last update: 2021-01-21 08:14    [W:0.037 / U:0.380 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site