lkml.org 
[lkml]   [2021]   [Jan]   [19]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH] extcon: sm5502: Detect OTG when USB_ID is connected to ground
Date
From: Nikita Travkin <nikitos.tr@gmail.com>

In it's curent state this driver ignores OTG adapters with ID pin
connected to ground. This commit adds a check to set extcon into
host mode when such OTG adapter is connected.

Signed-off-by: Nikita Travkin <nikitos.tr@gmail.com>

---

This issue was already reported in [1] and this behaviour appears
for both Samsung Galaxy A5 (2015) mentioned there and A3 that I was
working on. This patch allows OTG detection on A3.

[1]: https://lore.kernel.org/lkml/20191011145015.GA127238@gerhold.net/
---
drivers/extcon/extcon-sm5502.c | 22 ++++++++++++++++++++--
1 file changed, 20 insertions(+), 2 deletions(-)

diff --git a/drivers/extcon/extcon-sm5502.c b/drivers/extcon/extcon-sm5502.c
index 106d4da647bd..db41d1c58efd 100644
--- a/drivers/extcon/extcon-sm5502.c
+++ b/drivers/extcon/extcon-sm5502.c
@@ -144,6 +144,7 @@ enum sm5502_muic_acc_type {
SM5502_MUIC_ADC_AUDIO_TYPE1_FULL_REMOTE = 0x3e, /* | 001|11110| */
SM5502_MUIC_ADC_AUDIO_TYPE1_SEND_END = 0x5e, /* | 010|11110| */
/* |Dev Type1|--ADC| */
+ SM5502_MUIC_ADC_GROUND_USB_OTG = 0x80, /* | 100|00000| */
SM5502_MUIC_ADC_OPEN_USB = 0x5f, /* | 010|11111| */
SM5502_MUIC_ADC_OPEN_TA = 0xdf, /* | 110|11111| */
SM5502_MUIC_ADC_OPEN_USB_OTG = 0xff, /* | 111|11111| */
@@ -291,11 +292,27 @@ static unsigned int sm5502_muic_get_cable_type(struct sm5502_muic_info *info)
* connected with to MUIC device.
*/
cable_type = adc & SM5502_REG_ADC_MASK;
- if (cable_type == SM5502_MUIC_ADC_GROUND)
- return SM5502_MUIC_ADC_GROUND;

switch (cable_type) {
case SM5502_MUIC_ADC_GROUND:
+ ret = regmap_read(info->regmap, SM5502_REG_DEV_TYPE1,
+ &dev_type1);
+ if (ret) {
+ dev_err(info->dev, "failed to read DEV_TYPE1 reg\n");
+ return ret;
+ }
+
+ switch (dev_type1) {
+ case SM5502_REG_DEV_TYPE1_USB_OTG_MASK:
+ cable_type = SM5502_MUIC_ADC_GROUND_USB_OTG;
+ break;
+ default:
+ dev_dbg(info->dev,
+ "cannot identify the cable type: adc(0x%x), dev_type1(0x%x)\n",
+ adc, dev_type1);
+ return -EINVAL;
+ }
+ break;
case SM5502_MUIC_ADC_SEND_END_BUTTON:
case SM5502_MUIC_ADC_REMOTE_S1_BUTTON:
case SM5502_MUIC_ADC_REMOTE_S2_BUTTON:
@@ -396,6 +413,7 @@ static int sm5502_muic_cable_handler(struct sm5502_muic_info *info,
con_sw = DM_DP_SWITCH_OPEN;
vbus_sw = VBUSIN_SWITCH_VBUSOUT;
break;
+ case SM5502_MUIC_ADC_GROUND_USB_OTG:
case SM5502_MUIC_ADC_OPEN_USB_OTG:
id = EXTCON_USB_HOST;
con_sw = DM_DP_SWITCH_USB;
--
2.25.1
\
 
 \ /
  Last update: 2021-01-19 15:18    [W:0.071 / U:0.600 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site