lkml.org 
[lkml]   [2021]   [Jan]   [12]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH] iio: adc: stm32-adc: fix erroneous handling of spurious IRQs
Date
1c6c69525b40 ("genirq: Reject bogus threaded irq requests") makes sure
that threaded IRQs either
- have IRQF_ONESHOT set
- don't have the default just return IRQ_WAKE_THREAD primary handler

This is necessary because level-triggered interrupts need to be masked,
either at device or irqchip, to avoid an interrupt storm.

For spurious interrupts, the STM32 ADC driver still does this bogus
request though:
- It doesn't set IRQF_ONESHOT
- Its primary handler just returns IRQ_WAKE_THREAD if the interrupt
is unexpected, i.e. !(status & enabled_mask)
- stm32mp151.dtsi describes the ADC interrupt as level-triggered

Fix this by setting IRQF_ONESHOT to have the irqchip mask the IRQ
until the IRQ thread has finished.

IRQF_ONESHOT also has the effect that the primary handler is no longer
forced into a thread. This makes the issue with spurious interrupts
interrupts disappear when reading the ADC on a threadirqs=1 kernel.
This used to result in following kernel error message:

iio iio:device1: Unexpected IRQ: IER=0x00000000, ISR=0x0000100e
or
iio iio:device1: Unexpected IRQ: IER=0x00000004, ISR=0x0000100a

But with this patch applied (or threaded IRQs disabled), this no longer
occurs.

Cc: Lucas Stach <l.stach@pengutronix.de>
Reported-by: Holger Assmann <has@pengutronix.de>
Fixes: 695e2f5c289b ("iio: adc: stm32-adc: fix a regression when using dma and irq")
Signed-off-by: Ahmad Fatoum <a.fatoum@pengutronix.de>
---
drivers/iio/adc/stm32-adc.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/drivers/iio/adc/stm32-adc.c b/drivers/iio/adc/stm32-adc.c
index c067c994dae2..7e0e21c79ac8 100644
--- a/drivers/iio/adc/stm32-adc.c
+++ b/drivers/iio/adc/stm32-adc.c
@@ -1910,7 +1910,7 @@ static int stm32_adc_probe(struct platform_device *pdev)

ret = devm_request_threaded_irq(&pdev->dev, adc->irq, stm32_adc_isr,
stm32_adc_threaded_isr,
- 0, pdev->name, indio_dev);
+ IRQF_ONESHOT, pdev->name, indio_dev);
if (ret) {
dev_err(&pdev->dev, "failed to request IRQ\n");
return ret;
--
2.30.0
\
 
 \ /
  Last update: 2021-01-12 16:28    [W:0.057 / U:0.208 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site