lkml.org 
[lkml]   [2021]   [Jan]   [12]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
From
Subject[PATCH 0/9] Config and devicetree updates for the Librem 5 phone
Date
This is another set of updates in order to maintain support for the
Librem 5 phone:

Guido Günther (5):
arm64: defconfig: Enable vibra-pwm
arm64: dts: imx8mq-librem5: Mark charger IRQ as High-Z
arm64: dts: imx8mq-librem5: Don't mark buck3 as always on
arm64: dts: imx8mq-librem5: Add usb-c chip as supplier for the charger
arm64: dts: imx8mq-librem5: Add LCD_1V8 regulator

Martin Kepplinger (4):
arm64: dts: imx8mq-librem5: enable the LCD panel
arm64: dts: imx8mq-librem5: set regulators boot-on
arm64: dts: Add Librem5 Evergreen
dt-bindings: arm: fsl: Add the librem 5 Evergreen revision

.../devicetree/bindings/arm/fsl.yaml | 1 +
arch/arm64/boot/dts/freescale/Makefile | 1 +
.../boot/dts/freescale/imx8mq-librem5-r4.dts | 35 ++++++++
.../boot/dts/freescale/imx8mq-librem5.dtsi | 83 ++++++++++++++++++-
arch/arm64/configs/defconfig | 1 +
5 files changed, 117 insertions(+), 4 deletions(-)
create mode 100644 arch/arm64/boot/dts/freescale/imx8mq-librem5-r4.dts

--
2.20.1

\
 
 \ /
  Last update: 2021-01-12 10:56    [W:0.053 / U:0.432 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site