lkml.org 
[lkml]   [2020]   [Sep]   [7]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
From
Subject[PATCH v2 0/3] iWave G21D-Q7 enable flash, CAN and SD2 LED
Date
Hi All,

This patch series enables PCIe, SPI NOR flash, CAN0 and SD2 LED indication
on iWave G21D-Q7 board.

Patches apply on top of [1] and also dependent on patch [2]
[1] https://git.kernel.org/pub/scm/linux/kernel/git/geert/
renesas-devel.git/log/?h=renesas-arm-dt-for-v5.10
[2] https://patchwork.kernel.org/patch/11712541/

Cheers,
Prabhakar

v1->v2
* Set SD2 LED trigger GPIO as GPIO_ACTIVE_HIGH
* Added missing "msiof0_sync" in msiof0 pins
* Corrected to can1 interface on carrier board

Lad Prabhakar (3):
ARM: dts: r8a7742-iwg21d-q7: Add SPI NOR support
ARM: dts: r8a7742-iwg21d-q7: Add can1 support to carrier board
ARM: dts: r8a7742-iwg21d-q7: Enable SD2 LED indication

arch/arm/boot/dts/r8a7742-iwg21d-q7.dts | 62 +++++++++++++++++++++++++
1 file changed, 62 insertions(+)

--
2.17.1

\
 
 \ /
  Last update: 2020-09-07 17:58    [W:0.096 / U:0.528 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site