lkml.org 
[lkml]   [2020]   [Sep]   [5]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
From
Subject[PATCH v2 0/4] soundwire: qcom: add support for mmio soundwire master
Date
This adds initial support for soundwire device on sm8250.

Tested with the "wsa" sdw device, which is simpler than the others.

v2 addresses some feedback, but I kept this series as simple as possible.
In particular, I didn't implement CMD_NACKED from FIFO_STATUS, because
the downstream driver doesn't define this bit, so I can't implement it.
Soundwire works without it and It shouldn't be difficult to implement later.

Jonathan Marek (4):
soundwire: qcom: fix abh/ahb typo
soundwire: qcom: avoid dependency on CONFIG_SLIMBUS
soundwire: qcom: add support for mmio soundwire master devices
soundwire: qcom: add v1.5.1 compatible

.../bindings/soundwire/qcom,sdw.txt | 1 +
drivers/soundwire/Kconfig | 2 +-
drivers/soundwire/qcom.c | 38 +++++++++++++++++--
3 files changed, 36 insertions(+), 5 deletions(-)

--
2.26.1

\
 
 \ /
  Last update: 2020-09-05 19:42    [W:1.796 / U:0.004 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site