lkml.org 
[lkml]   [2020]   [Sep]   [18]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
From
Date
SubjectRe: [PATCH net-next v4 5/5] ravb: Add support for explicit internal clock delay configuration
Hi Dan,

On Thu, Sep 17, 2020 at 8:50 PM Dan Murphy <dmurphy@ti.com> wrote:
> On 9/17/20 8:57 AM, Geert Uytterhoeven wrote:
> > Some EtherAVB variants support internal clock delay configuration, which
> > can add larger delays than the delays that are typically supported by
> > the PHY (using an "rgmii-*id" PHY mode, and/or "[rt]xc-skew-ps"
> > properties).
> >
> > Historically, the EtherAVB driver configured these delays based on the
> > "rgmii-*id" PHY mode. This caused issues with PHY drivers that
> > implement PHY internal delays properly[1]. Hence a backwards-compatible
> > workaround was added by masking the PHY mode[2].
> >
> > Add proper support for explicit configuration of the MAC internal clock
> > delays using the new "[rt]x-internal-delay-ps" properties.
> > Fall back to the old handling if none of these properties is present.
> >
> > [1] Commit bcf3440c6dd78bfe ("net: phy: micrel: add phy-mode support for
> > the KSZ9031 PHY")
> > [2] Commit 9b23203c32ee02cd ("ravb: Mask PHY mode to avoid inserting
> > delays twice").
> >
> > Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
> > Reviewed-by: Sergei Shtylyov <sergei.shtylyov@cogentembedded.com>
> > Reviewed-by: Florian Fainelli <f.fainelli@gmail.com>

> > @@ -1989,20 +1986,41 @@ static const struct soc_device_attribute ravb_delay_mode_quirk_match[] = {
> > };
> >
> > /* Set tx and rx clock internal delay modes */
> > -static void ravb_parse_delay_mode(struct net_device *ndev)
> > +static void ravb_parse_delay_mode(struct device_node *np, struct net_device *ndev)
> > {
> > struct ravb_private *priv = netdev_priv(ndev);
> > + bool explicit_delay = false;
> > + u32 delay;
> > +
> > + if (!of_property_read_u32(np, "rx-internal-delay-ps", &delay)) {
> > + /* Valid values are 0 and 1800, according to DT bindings */
> > + priv->rxcidm = !!delay;
> > + explicit_delay = true;
> > + }
> > + if (!of_property_read_u32(np, "tx-internal-delay-ps", &delay)) {
> > + /* Valid values are 0 and 2000, according to DT bindings */
> > + priv->txcidm = !!delay;
> > + explicit_delay = true;
> > + }
> There are helper functions for this
>
> s32 phy_get_internal_delay(struct phy_device *phydev, struct device
> *dev, const int *delay_values, int size, bool is_rx)

That helper operates on the PHY device, not on the MAC device.
Cfr. what I stated in the cover letter:

This can be considered the MAC counterpart of commit 9150069bf5fc0e86
("dt-bindings: net: Add tx and rx internal delays"), which applies to
the PHY. Note that unlike commit 92252eec913b2dd5 ("net: phy: Add a
helper to return the index for of the internal delay"), no helpers are
provided to parse the DT properties, as so far there is a single user
only, which supports only zero or a single fixed value. Of course such
helpers can be added later, when the need arises, or when deemed useful
otherwise.

Gr{oetje,eeting}s,

Geert

--
Geert Uytterhoeven -- There's lots of Linux beyond ia32 -- geert@linux-m68k.org

In personal conversations with technical people, I call myself a hacker. But
when I'm talking to journalists I just say "programmer" or something like that.
-- Linus Torvalds

\
 
 \ /
  Last update: 2020-09-18 11:04    [W:0.047 / U:0.244 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site