lkml.org 
[lkml]   [2020]   [Sep]   [18]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH v1 05/10] bus: mhi: core: Disable IRQs when powering down
Date
While powering down, the device may or may not acknowledge the MHI
RESET issued by host for graceful shutdown scenario which can lead
to a rogue device sending an interrupt after the clean-up has been
done. This can result in a tasklet being scheduled after it has
been killed and access already freed memory causing a NULL pointer
exception. Avoid this corner case by disabling the interrupts as a
part of host clean up.

Signed-off-by: Bhaumik Bhatt <bbhatt@codeaurora.org>
---
drivers/bus/mhi/core/pm.c | 1 +
1 file changed, 1 insertion(+)

diff --git a/drivers/bus/mhi/core/pm.c b/drivers/bus/mhi/core/pm.c
index 1862960..3462d82 100644
--- a/drivers/bus/mhi/core/pm.c
+++ b/drivers/bus/mhi/core/pm.c
@@ -517,6 +517,7 @@ static void mhi_pm_disable_transition(struct mhi_controller *mhi_cntrl,
for (i = 0; i < mhi_cntrl->total_ev_rings; i++, mhi_event++) {
if (mhi_event->offload_ev)
continue;
+ disable_irq(mhi_cntrl->irq[mhi_event->irq]);
tasklet_kill(&mhi_event->task);
}

--
The Qualcomm Innovation Center, Inc. is a member of the Code Aurora Forum,
a Linux Foundation Collaborative Project
\
 
 \ /
  Last update: 2020-09-19 04:03    [W:0.253 / U:0.496 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site