lkml.org 
[lkml]   [2020]   [Sep]   [14]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
From
Subject[RFC PATCH 00/35] SEV-ES hypervisor support
Date
From: Tom Lendacky <thomas.lendacky@amd.com>

This patch series provides support for running SEV-ES guests under KVM.

Secure Encrypted Virtualization - Encrypted State (SEV-ES) expands on the
SEV support to protect the guest register state from the hypervisor. See
"AMD64 Architecture Programmer's Manual Volume 2: System Programming",
section "15.35 Encrypted State (SEV-ES)" [1].

In order to allow a hypervisor to perform functions on behalf of a guest,
there is architectural support for notifying a guest's operating system
when certain types of VMEXITs are about to occur. This allows the guest to
selectively share information with the hypervisor to satisfy the requested
function. The notification is performed using a new exception, the VMM
Communication exception (#VC). The information is shared through the
Guest-Hypervisor Communication Block (GHCB) using the VMGEXIT instruction.
The GHCB format and the protocol for using it is documented in "SEV-ES
Guest-Hypervisor Communication Block Standardization" [2].

Under SEV-ES, a vCPU save area (VMSA) must be encrypted. SVM is updated to
build the initial VMSA and then encrypt it before running the guest. Once
encrypted, it must not be modified by the hypervisor. Modification of the
VMSA will result in the VMRUN instruction failing with a SHUTDOWN exit
code. KVM must support the VMGEXIT exit code in order to perform the
necessary functions required of the guest. The GHCB is used to exchange
the information needed by both the hypervisor and the guest.

To simplify access to the VMSA and the GHCB, SVM uses an accessor function
to obtain the address of the either the VMSA or the GHCB, depending on the
stage of execution of the guest.

There are changes to some of the intercepts that are needed under SEV-ES.
For example, CR0 writes cannot be intercepted, so the code needs to ensure
that the intercept is not enabled during execution or that the hypervisor
does not try to read the register as part of exit processing. Another
example is shutdown processing, where the vCPU cannot be directly reset.

Support is added to handle VMGEXIT events and implement the GHCB protocol.
This includes supporting standard exit events, like a CPUID instruction
intercept, to new support, for things like AP processor booting. Much of
the existing SVM intercept support can be re-used by setting the exit
code information from the VMGEXIT and calling the appropriate intercept
handlers.

Finally, to launch and run an SEV-ES guest requires changes to the vCPU
initialization, loading and execution.

[1] https://www.amd.com/system/files/TechDocs/24593.pdf
[2] https://developer.amd.com/wp-content/resources/56421.pdf

---

These patches are based on a commit of the KVM next branch. However, I had
to backport recent SEV-ES guest patches (a previous series to the actual
patches that are now in the tip tree) into my development branch, since
there are prereq patches needed by this series. As a result, this patch
series will not successfully build or apply to the KVM next branch as is.

A version of the tree can be found at:
https://github.com/AMDESE/linux/tree/sev-es-5.8-v3

Cc: Paolo Bonzini <pbonzini@redhat.com>
Cc: Jim Mattson <jmattson@google.com>
Cc: Joerg Roedel <joro@8bytes.org>
Cc: Sean Christopherson <sean.j.christopherson@intel.com>
Cc: Vitaly Kuznetsov <vkuznets@redhat.com>
Cc: Wanpeng Li <wanpengli@tencent.com>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Brijesh Singh <brijesh.singh@amd.com>

Tom Lendacky (35):
KVM: SVM: Remove the call to sev_platform_status() during setup
KVM: SVM: Add support for SEV-ES capability in KVM
KVM: SVM: Add indirect access to the VM save area
KVM: SVM: Make GHCB accessor functions available to the hypervisor
KVM: SVM: Add initial support for SEV-ES GHCB access to KVM
KVM: SVM: Add required changes to support intercepts under SEV-ES
KVM: SVM: Modify DRx register intercepts for an SEV-ES guest
KVM: SVM: Prevent debugging under SEV-ES
KVM: SVM: Do not emulate MMIO under SEV-ES
KVM: SVM: Cannot re-initialize the VMCB after shutdown with SEV-ES
KVM: SVM: Prepare for SEV-ES exit handling in the sev.c file
KVM: SVM: Add initial support for a VMGEXIT VMEXIT
KVM: SVM: Create trace events for VMGEXIT processing
KVM: SVM: Add support for SEV-ES GHCB MSR protocol function 0x002
KVM: SVM: Add support for SEV-ES GHCB MSR protocol function 0x004
KVM: SVM: Add support for SEV-ES GHCB MSR protocol function 0x100
KVM: SVM: Create trace events for VMGEXIT MSR protocol processing
KVM: SVM: Support MMIO for an SEV-ES guest
KVM: SVM: Support port IO operations for an SEV-ES guest
KVM: SVM: Add SEV/SEV-ES support for intercepting INVD
KVM: SVM: Add support for EFER write traps for an SEV-ES guest
KVM: SVM: Add support for CR0 write traps for an SEV-ES guest
KVM: SVM: Add support for CR4 write traps for an SEV-ES guest
KVM: SVM: Add support for CR8 write traps for an SEV-ES guest
KVM: x86: Update __get_sregs() / __set_sregs() to support SEV-ES
KVM: SVM: Guest FPU state save/restore not needed for SEV-ES guest
KVM: SVM: Add support for booting APs for an SEV-ES guest
KVM: X86: Update kvm_skip_emulated_instruction() for an SEV-ES guest
KVM: SVM: Add NMI support for an SEV-ES guest
KVM: SVM: Set the encryption mask for the SVM host save area
KVM: SVM: Update ASID allocation to support SEV-ES guests
KVM: SVM: Provide support for SEV-ES vCPU creation/loading
KVM: SVM: Provide support for SEV-ES vCPU loading
KVM: SVM: Provide an updated VMRUN invocation for SEV-ES guests
KVM: SVM: Provide support to launch and run an SEV-ES guest

arch/x86/include/asm/kvm_host.h | 16 +
arch/x86/include/asm/msr-index.h | 1 +
arch/x86/include/asm/svm.h | 35 +-
arch/x86/include/uapi/asm/svm.h | 28 ++
arch/x86/kernel/cpu/vmware.c | 12 +-
arch/x86/kvm/Kconfig | 3 +-
arch/x86/kvm/cpuid.c | 1 +
arch/x86/kvm/kvm_cache_regs.h | 30 +-
arch/x86/kvm/mmu/mmu.c | 7 +
arch/x86/kvm/svm/nested.c | 125 +++---
arch/x86/kvm/svm/sev.c | 590 ++++++++++++++++++++++++--
arch/x86/kvm/svm/svm.c | 704 ++++++++++++++++++++++++-------
arch/x86/kvm/svm/svm.h | 357 ++++++++++++++--
arch/x86/kvm/svm/vmenter.S | 50 +++
arch/x86/kvm/trace.h | 99 +++++
arch/x86/kvm/vmx/vmx.c | 7 +
arch/x86/kvm/x86.c | 357 ++++++++++++++--
arch/x86/kvm/x86.h | 8 +
18 files changed, 2070 insertions(+), 360 deletions(-)

--
2.28.0

\
 
 \ /
  Last update: 2020-09-14 22:17    [W:0.452 / U:1.204 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site