lkml.org 
[lkml]   [2020]   [Aug]   [9]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
From
Subject[PATCH v3 00/18] gpio: cdev: add uAPI v2
Date
This patchset defines and implements adds a new version of the
GPIO CDEV uAPI to address existing 32/64-bit alignment issues, add
support for debounce, event sequence numbers, and allowing for requested
lines with different configurations.
It provides some future proofing by adding optional configuration fields
and padding reserved for future use.

The series can be partitioned into two sets; the first eleven
contain the v2 uAPI implementation, and the final seven port
the GPIO tools to the v2 uAPI and extend them to use new uAPI features.

The more complicated patches include their own commentary where
appropriate.

Cheers,
Kent.

Changes since v2:
- disabling the character device from the build requires EXPERT
- uAPI revisions (see patch 02)
- replace padding_not_zeroed with calls to memchr_inv
- don't use bitops on 64-bit flags as that doesn't work on BE-32
- accept first attribute matching a line in gpio_v2_line_config.attrs
rather than the last
- rework lsgpio port to uAPI v2 as flags reverted to v1 like layout
(since patch v2)
- swapped patches 17 and 18 to apply debounce to multiple monitored
lines

Changes since v1:
- split out cleanup patches into a separate series.
- split implementation patch into a patch for each ioctl or major feature.
- split tool port patch into a patch per tool.
- rework uAPI to allow requested lines with different configurations.

Kent Gibson (18):
gpio: uapi: define GPIO_MAX_NAME_SIZE for array sizes
gpio: uapi: define uAPI v2
gpiolib: make cdev a build option
gpiolib: add build option for CDEV v1 ABI
gpiolib: cdev: support GPIO_V2_GET_LINE_IOCTL and
GPIO_V2_LINE_GET_VALUES_IOCTL
gpiolib: cdev: support GPIO_V2_GET_LINEINFO_IOCTL and
GPIO_V2_GET_LINEINFO_WATCH_IOCTL
gpiolib: cdev: support edge detection for uAPI v2
gpiolib: cdev: support GPIO_V2_LINE_SET_CONFIG_IOCTL
gpiolib: cdev: support GPIO_V2_LINE_SET_VALUES_IOCTL
gpiolib: cdev: support setting debounce
gpio: uapi: document uAPI v1 as deprecated
tools: gpio: port lsgpio to v2 uAPI
tools: gpio: port gpio-watch to v2 uAPI
tools: gpio: rename nlines to num_lines
tools: gpio: port gpio-hammer to v2 uAPI
tools: gpio: port gpio-event-mon to v2 uAPI
tools: gpio: add multi-line monitoring to gpio-event-mon
tools: gpio: add debounce support to gpio-event-mon

drivers/gpio/Kconfig | 29 +-
drivers/gpio/Makefile | 2 +-
drivers/gpio/gpiolib-cdev.c | 1333 ++++++++++++++++++++++++++++++++++-
drivers/gpio/gpiolib-cdev.h | 15 +
drivers/gpio/gpiolib.c | 2 +
drivers/gpio/gpiolib.h | 6 +
include/uapi/linux/gpio.h | 315 ++++++++-
tools/gpio/gpio-event-mon.c | 146 ++--
tools/gpio/gpio-hammer.c | 56 +-
tools/gpio/gpio-utils.c | 127 ++--
tools/gpio/gpio-utils.h | 50 +-
tools/gpio/gpio-watch.c | 16 +-
tools/gpio/lsgpio.c | 60 +-
13 files changed, 1943 insertions(+), 214 deletions(-)


base-commit: 22cc422070d9a9a399f8a70b89f1b852945444cb
--
2.28.0

\
 
 \ /
  Last update: 2020-08-09 15:26    [W:0.139 / U:0.644 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site