lkml.org 
[lkml]   [2020]   [Aug]   [7]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
Subject[PATCH 1/2] Add a manpage for watch_queue(7)
From
Date
Add a manual page for the notifications/watch_queue facility.

Signed-off-by: David Howells <dhowells@redhat.com>
---

man7/watch_queue.7 | 285 ++++++++++++++++++++++++++++++++++++++++++++++++++++
1 file changed, 285 insertions(+)
create mode 100644 man7/watch_queue.7

diff --git a/man7/watch_queue.7 b/man7/watch_queue.7
new file mode 100644
index 000000000..6b22ad689
--- /dev/null
+++ b/man7/watch_queue.7
@@ -0,0 +1,285 @@
+.\"
+.\" Copyright (C) 2020 Red Hat, Inc. All Rights Reserved.
+.\" Written by David Howells (dhowells@redhat.com)
+.\"
+.\" This program is free software; you can redistribute it and/or
+.\" modify it under the terms of the GNU General Public Licence
+.\" as published by the Free Software Foundation; either version
+.\" 2 of the Licence, or (at your option) any later version.
+.\"
+.TH WATCH_QUEUE 7 "2020-08-07" Linux "General Kernel Notifications"
+.\"""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""
+.SH NAME
+General kernel notification queue
+.\"""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""
+.SH SYNOPSIS
+#include <linux/watch_queue.h>
+.EX
+
+pipe2(fds, O_NOTIFICATION_PIPE);
+ioctl(fds[0], IOC_WATCH_QUEUE_SET_SIZE, max_message_count);
+ioctl(fds[0], IOC_WATCH_QUEUE_SET_FILTER, &filter);
+keyctl_watch_key(KEY_SPEC_SESSION_KEYRING, fds[0], 0x01);
+for (;;) {
+ buf_len = read(fds[0], buffer, sizeof(buffer));
+ ...
+}
+.EE
+.SH OVERVIEW
+.PP
+The general kernel notification queue is a general purpose transport for kernel
+notification messages to userspace. Notification messages are marked with type
+information so that events from multiple sources can be distinguished.
+Messages are also of variable length to accommodate different information for
+each type.
+.PP
+Queues are implemented on top of standard pipes and multiple independent queues
+can be created. After a pipe has been created, its size and filtering can be
+configured and event sources attached. The pipe can then be read or polled to
+wait for messages.
+.PP
+Multiple messages may be read out of the queue at a time if the buffer is large
+enough, but messages will not get split amongst multiple reads. If the buffer
+isn't large enough for a message,
+.B ENOBUFS
+will be returned.
+.PP
+In the case of message loss,
+.BR read (2)
+will fabricate a loss message and pass that to userspace immediately after the
+point at which the loss occurred.
+.PP
+A notification pipe allocates a certain amount of locked kernel memory (so that
+the kernel can write a notification into it from contexts where allocation is
+restricted), and so is subject to pipe resource limit restrictions.
+.PP
+Sources must be attached to a queue manually; there's no single global event
+source, but rather a variety of sources, each of which can be attached to by
+multiple queues. Attachments can be set up by:
+.TP
+.BR keyctl_watch_key (3)
+Monitor a key or keyring for changes.
+.PP
+Because a source can produce a lot of different events, not all of which may be
+of interest to the watcher, a filter can be set on a queue to determine whether
+a particular event will get inserted in a queue at the point of posting inside
+the kernel.
+
+.\"""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""
+.SH MESSAGE STRUCTURE
+.PP
+The output from reading the pipe is divided into variable length messages.
+Read will never split a message across two separate read calls. Each message
+begins with a header of the form:
+.PP
+.in +4n
+.EX
+struct watch_notification {
+ __u32 type:24;
+ __u32 subtype:8;
+ __u32 info;
+};
+.EE
+.in
+.PP
+Where
+.I type
+indicates the general class of notification,
+.I subtype
+indicates the specific type of notification within that class and
+.I info
+includes the message length (in bytes), the watcher's ID and some type-specific
+information.
+.PP
+A special message type,
+.BR WATCH_TYPE_META ,
+exists to convey information about the notification facility itself. It has a
+number of subtypes:
+.TP
+.B WATCH_META_LOSS_NOTIFICATION
+This indicates one or more messages were lost, probably due to a buffer
+overrun.
+.TP
+.B WATCH_META_REMOVAL_NOTIFICATION
+This indicates that a notification source went away whilst it is being watched.
+This comes in two lengths: a short variant that carries just the header and a
+long variant that includes a 64-bit identifier as well that identifies the
+source more precisely (which variant is used and how the identifier should be
+interpreted is source dependent).
+.PP
+.I info
+includes the following fields:
+.TP
+.B WATCH_INFO_LENGTH
+Bits 0-6 indicate the size of the message in bytes, and can be between 8 and
+127.
+.TP
+.B WATCH_INFO_ID
+Bits 8-15 indicate the tag given to the source binding call. This is a number
+between 0 and 255 and is purely a source index for userspace's use and isn't
+interpreted by the kernel.
+.TP
+.B WATCH_INFO_TYPE_INFO
+Bits 16-31 indicate subtype-dependent information.
+
+.\"""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""
+.SH IOCTL COMMANDS
+Pipes opened O_NOTIFICATION_PIPE have the following
+.IR ioctl ()
+commands available:
+.TP
+.B IOC_WATCH_QUEUE_SET_SIZE
+The ioctl argument is indicates the maximum number of messages that can be
+inserted into the pipe. This must be a power of two. This command also
+pre-allocates memory to hold messages.
+.IP
+This may only be done once and the queue cannot be used until this command has
+been done.
+.TP
+.B IOC_WATCH_QUEUE_SET_FILTER
+This is used to set filters on the notifications that get written into the
+buffer. The ioctl argument points to a structure of the following form:
+.IP
+.in +4n
+.EX
+struct watch_notification_filter {
+ __u32 nr_filters;
+ __u32 __reserved;
+ struct watch_notification_type_filter filters[];
+};
+.EE
+.in
+.IP
+Where
+.I nr_filters
+indicates the number of elements in the
+.IR filters []
+array. Each element in the filters array specifies a filter and is of the
+following form:
+.IP
+.in +4n
+.EX
+struct watch_notification_type_filter {
+ __u32 type;
+ __u32 info_filter;
+ __u32 info_mask;
+ __u32 subtype_filter[8];
+};
+.EE
+.in
+.IP
+Where
+.I type
+refer to the type field in a notification record header, info_filter and
+info_mask refer to the info field and subtype_filter is a bit-mask of subtypes.
+.IP
+If no filters are installed, all notifications are allowed by default and if
+one or more filters are installed, notifications are disallowed by default.
+.IP
+A notifications matches a filter if, for notification N and filter F:
+.IP
+.in +4n
+.EX
+N->type == F->type &&
+(F->subtype_filter[N->subtype >> 5] &
+ (1U << (N->subtype & 31))) &&
+(N->info & F->info_mask) == F->info_filter)
+.EE
+.in
+.IP
+
+
+.\"""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""
+.SH EXAMPLE
+To use the notification mechanism, first of all the pipe has to be opened and
+the size must be set:
+.PP
+.in +4n
+.EX
+int fds[2];
+pipe2(fd[0], O_NOTIFICATION_QUEUE);
+int wfd = fd[0];
+
+ioctl(wfd, IOC_WATCH_QUEUE_SET_SIZE, 16);
+.EE
+.in
+.PP
+From this point, the queue is open for business. Filters can be set to
+restrict the notifications that get inserted into the buffer from the sources
+that are being watched. For example:
+.PP
+.in +4n
+.EX
+static struct watch_notification_filter filter = {
+ .nr_filters = 1,
+ .__reserved = 0,
+ .filters = {
+ [0] = {
+ .type = WATCH_TYPE_KEY_NOTIFY,
+ .subtype_filter[0] = 1 << NOTIFY_KEY_LINKED,
+ .info_filter = 1 << WATCH_INFO_FLAG_2,
+ .info_mask = 1 << WATCH_INFO_FLAG_2,
+ },
+ },
+};
+
+ioctl(wfd, IOC_WATCH_QUEUE_SET_FILTER, &filter);
+.EE
+.in
+.PP
+will only allow key-change notifications that indicate a key is linked into a
+keyring and then only if type-specific flag WATCH_INFO_FLAG_2 is set on the
+notification.
+.PP
+Sources can then be watched, for example:
+.PP
+.in +4n
+.EX
+keyctl_watch_key(KEY_SPEC_SESSION_KEYRING, wfd, 0x33);
+.EE
+.in
+.PP
+The first places a watch on the process's session keyring, directing the
+notifications to the buffer we just created and specifying that they should be
+tagged with 0x33 in the info ID field.
+.PP
+When it is determined that there is something in the buffer, messages can be
+read out of the ring with something like the following:
+.PP
+.in +4n
+.EX
+for (;;) {
+ unsigned char buf[128];
+ read(fd, buf, sizeof(buf));
+ struct watch_notification *n = (struct watch_notification *)buf;
+ switch (n->type) {
+ case WATCH_TYPE_META:
+ switch (n->subtype) {
+ case WATCH_META_REMOVAL_NOTIFICATION:
+ saw_removal_notification(n);
+ break;
+ case WATCH_META_LOSS_NOTIFICATION:
+ printf("-- LOSS --\n");
+ break;
+ }
+ break;
+ case WATCH_TYPE_KEY_NOTIFY:
+ saw_key_change(n);
+ break;
+ }
+}
+.EE
+.in
+.PP
+
+.\"""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""
+.SH VERSIONS
+The notification queue driver first appeared in v5.8 of the Linux kernel.
+.SH SEE ALSO
+.ad l
+.nh
+.BR keyctl (1),
+.BR ioctl (2),
+.BR pipe2 (2),
+.BR read (2),
+.BR keyctl_watch_key (3)

\
 
 \ /
  Last update: 2020-08-07 17:06    [W:0.079 / U:0.648 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site