lkml.org 
[lkml]   [2020]   [Aug]   [7]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH] serial: qcom_geni_serial: Fix recent kdb hang
Date
The commit e42d6c3ec0c7 ("serial: qcom_geni_serial: Make kgdb work
even if UART isn't console") worked pretty well and I've been doing a
lot of debugging with it. However, recently I typed "dmesg" in kdb
and then held the space key down to scroll through the pagination. My
device hung. This was repeatable and I found that it was introduced
with the aforementioned commit.

It turns out that there are some strange boundary cases in geni where
in some weird situations it will signal RX_LAST but then will put 0 in
RX_LAST_BYTE. This means that the entire last FIFO entry is valid.
This weird corner case is handled in qcom_geni_serial_handle_rx()
where you can see that we only honor RX_LAST_BYTE if RX_LAST is set
_and_ RX_LAST_BYTE is non-zero. If either of these is not true we use
BYTES_PER_FIFO_WORD (4) for the size of the last FIFO word.

Let's fix kgdb. While at it, also use the proper #define for 4.

Fixes: e42d6c3ec0c7 ("serial: qcom_geni_serial: Make kgdb work even if UART isn't console")
Signed-off-by: Douglas Anderson <dianders@chromium.org>
---

drivers/tty/serial/qcom_geni_serial.c | 9 +++++++--
1 file changed, 7 insertions(+), 2 deletions(-)

diff --git a/drivers/tty/serial/qcom_geni_serial.c b/drivers/tty/serial/qcom_geni_serial.c
index 07b7b6b05b8b..e27077656939 100644
--- a/drivers/tty/serial/qcom_geni_serial.c
+++ b/drivers/tty/serial/qcom_geni_serial.c
@@ -361,11 +361,16 @@ static int qcom_geni_serial_get_char(struct uart_port *uport)
return NO_POLL_CHAR;

if (word_cnt == 1 && (status & RX_LAST))
+ /*
+ * NOTE: If RX_LAST_BYTE_VALID is 0 it needs to be
+ * treated as if it was BYTES_PER_FIFO_WORD.
+ */
private_data->poll_cached_bytes_cnt =
(status & RX_LAST_BYTE_VALID_MSK) >>
RX_LAST_BYTE_VALID_SHFT;
- else
- private_data->poll_cached_bytes_cnt = 4;
+
+ if (private_data->poll_cached_bytes_cnt == 0)
+ private_data->poll_cached_bytes_cnt = BYTES_PER_FIFO_WORD;

private_data->poll_cached_bytes =
readl(uport->membase + SE_GENI_RX_FIFOn);
--
2.28.0.236.gb10cc79966-goog
\
 
 \ /
  Last update: 2020-08-07 07:20    [W:0.065 / U:1.416 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site