lkml.org 
[lkml]   [2020]   [Aug]   [25]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
From
Subject[PATCH 0/3] iio: gyro: adxrs290: Add triggered buffer & debugfs support
Date
Introduce DATA_RDY trigger for triggered buffer setup; this enables continuous
data capture. Additionally, add support for direct register access using the debugfs
iio interface.

The device-tree bindings documentation illustrates an example of using a GPIO irq
line to trigger a data capture.

Nishant Malpani (3):
iio: gyro: adxrs290: Add triggered buffer support
dt-bindings: iio: gyro: adxrs290: Add required interrupts property
iio: gyro: adxrs290: Add debugfs register access support

.../bindings/iio/gyroscope/adi,adxrs290.yaml | 8 +
drivers/iio/gyro/Kconfig | 2 +
drivers/iio/gyro/adxrs290.c | 291 +++++++++++++++++-
3 files changed, 287 insertions(+), 14 deletions(-)

--
2.20.1

\
 
 \ /
  Last update: 2020-08-25 14:47    [W:4.070 / U:0.684 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site