lkml.org 
[lkml]   [2020]   [Aug]   [11]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH] arm64: dts: qcom: sc7180: Drop flags on mdss irqs
Date
The number of interrupt cells for the mdss interrupt controller is 1,
meaning there should only be one cell for the interrupt number, not two
where the second cell is the irq flags. Drop the second cell to match
the binding.

Cc: Kalyan Thota <kalyan_t@codeaurora.org>
Cc: Harigovindan P <harigovi@codeaurora.org
Fixes: a3db7ad1af49 ("arm64: dts: sc7180: add display dt nodes")
Signed-off-by: Stephen Boyd <swboyd@chromium.org>
---
arch/arm64/boot/dts/qcom/sc7180.dtsi | 4 ++--
1 file changed, 2 insertions(+), 2 deletions(-)

diff --git a/arch/arm64/boot/dts/qcom/sc7180.dtsi b/arch/arm64/boot/dts/qcom/sc7180.dtsi
index 31b9217bb5bf..9d1660e1a6f0 100644
--- a/arch/arm64/boot/dts/qcom/sc7180.dtsi
+++ b/arch/arm64/boot/dts/qcom/sc7180.dtsi
@@ -2357,7 +2357,7 @@ mdp: mdp@ae01000 {
<19200000>;

interrupt-parent = <&mdss>;
- interrupts = <0 IRQ_TYPE_LEVEL_HIGH>;
+ interrupts = <0>;

status = "disabled";

@@ -2380,7 +2380,7 @@ dsi0: dsi@ae94000 {
reg-names = "dsi_ctrl";

interrupt-parent = <&mdss>;
- interrupts = <4 IRQ_TYPE_LEVEL_HIGH>;
+ interrupts = <4>;

clocks = <&dispcc DISP_CC_MDSS_BYTE0_CLK>,
<&dispcc DISP_CC_MDSS_BYTE0_INTF_CLK>,
base-commit: bcf876870b95592b52519ed4aafcf9d95999bc9c
--
Sent by a computer, using git, on the internet

\
 
 \ /
  Last update: 2020-08-11 21:25    [W:0.037 / U:0.112 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site