lkml.org 
[lkml]   [2020]   [Jul]   [27]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
SubjectRe: [PATCH v7 0/2] phy: Add USB PHY support on Intel LGM SoC
From
Date
Hi Andy,

On 27/7/2020 7:09 pm, Andy Shevchenko wrote:
> On Mon, Jul 27, 2020 at 1:08 PM Ramuthevar,Vadivel MuruganX
> <vadivel.muruganx.ramuthevar@linux.intel.com> wrote:
>>
>> The USB PHY provides the optimized for low power dissipation while active, idle, or on standby.
>> Requires minimal external components, a single resistor, for best operation.
>> Supports 10/5-Gbps high-speed data transmission rates through 3-m USB 3.x cable
>> ---
>
>> v7:
>> - No Change
>
> I guess it's not the correct changelog entry.
> You moved file to another subsystem, didn't you?

Already added in v5 changelog, kindly please see below , Thanks!

>
>> v6:
>> - No Change
>> v5:
>> - As per Felipe and Greg's suggestion usb phy driver reviewed patches
>> changed the folder from drivers/usb/phy to drivers/phy
>> - Reviewed-By tag added in commit message
>> v4:
>> - Andy's review comments addressed
>> - drop the excess error debug prints
>> - error check optimized
>> - merge the split line to one line
>> v3:
>> - Andy's review comments update
>> - hardcode return value changed to actual return value from the callee
>> - add error check is fixed according to the above
>> - correct the assignment in redundant
>> - combine the split line into one line
>> v2:
>> - Address Phillip's review comments
>> - replace devm_reset_control_get() by devm_reset_control_get_exclusive()
>> - re-design the assert and deassert fucntion calls as per review comments
>> - address kbuild bot warnings
>> - add the comments
>> v1:
>> - initial version
>>
>> ---
>> dt-bindings: usb: Add USB PHY support for Intel LGM SoC
>> v7:
>> - Fixed the bot issue: usb-phy@e7e00000: '#phy-cells' is a required property
>> v6:
>> - Fixed the bot issue.
>> - replace node-name by usb-phy@ in example
>> v5:
>> - Reviewed-By tag added
>> v4:
>> - No Change
>> v3:
>> - No Change
>> v2:
>> - No Change
>> v1:
>> - initial version
>>
>>
>> Ramuthevar Vadivel Murugan (2):
>> dt-bindings: phy: Add USB PHY support for Intel LGM SoC
>> phy: Add USB3 PHY support for Intel LGM SoC
>>
>> .../devicetree/bindings/phy/intel,lgm-usb-phy.yaml | 58 +++++
>> drivers/phy/Kconfig | 11 +
>> drivers/phy/Makefile | 1 +
>> drivers/phy/phy-lgm-usb.c | 278 +++++++++++++++++++++
>> 4 files changed, 348 insertions(+)
>> create mode 100644 Documentation/devicetree/bindings/phy/intel,lgm-usb-phy.yaml
>> create mode 100644 drivers/phy/phy-lgm-usb.c
>>
>> --
>> 2.11.0
>>
>
>

\
 
 \ /
  Last update: 2020-07-28 04:52    [W:0.069 / U:0.492 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site