lkml.org 
[lkml]   [2020]   [Jul]   [27]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
From
Date
SubjectRe: [PATCH v7 0/2] phy: Add USB PHY support on Intel LGM SoC
On Mon, Jul 27, 2020 at 1:08 PM Ramuthevar,Vadivel MuruganX
<vadivel.muruganx.ramuthevar@linux.intel.com> wrote:
>
> The USB PHY provides the optimized for low power dissipation while active, idle, or on standby.
> Requires minimal external components, a single resistor, for best operation.
> Supports 10/5-Gbps high-speed data transmission rates through 3-m USB 3.x cable
> ---

> v7:
> - No Change

I guess it's not the correct changelog entry.
You moved file to another subsystem, didn't you?

> v6:
> - No Change
> v5:
> - As per Felipe and Greg's suggestion usb phy driver reviewed patches
> changed the folder from drivers/usb/phy to drivers/phy
> - Reviewed-By tag added in commit message
> v4:
> - Andy's review comments addressed
> - drop the excess error debug prints
> - error check optimized
> - merge the split line to one line
> v3:
> - Andy's review comments update
> - hardcode return value changed to actual return value from the callee
> - add error check is fixed according to the above
> - correct the assignment in redundant
> - combine the split line into one line
> v2:
> - Address Phillip's review comments
> - replace devm_reset_control_get() by devm_reset_control_get_exclusive()
> - re-design the assert and deassert fucntion calls as per review comments
> - address kbuild bot warnings
> - add the comments
> v1:
> - initial version
>
> ---
> dt-bindings: usb: Add USB PHY support for Intel LGM SoC
> v7:
> - Fixed the bot issue: usb-phy@e7e00000: '#phy-cells' is a required property
> v6:
> - Fixed the bot issue.
> - replace node-name by usb-phy@ in example
> v5:
> - Reviewed-By tag added
> v4:
> - No Change
> v3:
> - No Change
> v2:
> - No Change
> v1:
> - initial version
>
>
> Ramuthevar Vadivel Murugan (2):
> dt-bindings: phy: Add USB PHY support for Intel LGM SoC
> phy: Add USB3 PHY support for Intel LGM SoC
>
> .../devicetree/bindings/phy/intel,lgm-usb-phy.yaml | 58 +++++
> drivers/phy/Kconfig | 11 +
> drivers/phy/Makefile | 1 +
> drivers/phy/phy-lgm-usb.c | 278 +++++++++++++++++++++
> 4 files changed, 348 insertions(+)
> create mode 100644 Documentation/devicetree/bindings/phy/intel,lgm-usb-phy.yaml
> create mode 100644 drivers/phy/phy-lgm-usb.c
>
> --
> 2.11.0
>


--
With Best Regards,
Andy Shevchenko

\
 
 \ /
  Last update: 2020-07-27 13:09    [W:0.083 / U:0.184 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site