lkml.org 
[lkml]   [2020]   [Jul]   [22]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
From
Subject[PATCH v3 0/2] Add 802.1AD protocol support for dsa switch and ocelot driver
Date
From: "hongbo.wang" <hongbo.wang@nxp.com>

1. the patch 0001* is for setting single port into 802.1AD(QinQ) mode,
before this patch, the function dsa_slave_vlan_rx_add_vid didn't pass
the parameter "proto" to next port level, so switch's port can't get
parameter "proto"
after applying this patch, we can use the following commands to set port
to enable or disable QinQ mode:
ip link add link swp1 name swp1.100 type vlan protocol 802.1ad id 100
ip link del link swp1 name swp1.100

2. the patch 0002* is for setting QinQ related registers in ocelot
switch driver, after applying this patch, the switch(VSC99599)'s port can
enable or disable QinQ mode.

hongbo.wang (2):
net: dsa: Add protocol support for 802.1AD when adding or deleting
vlan for dsa switch and port
net: dsa: ocelot: Add support for QinQ Operation

drivers/net/dsa/ocelot/felix.c | 8 ++++++
drivers/net/ethernet/mscc/ocelot.c | 44 ++++++++++++++++++++++++------
include/net/switchdev.h | 1 +
include/soc/mscc/ocelot.h | 1 +
net/dsa/dsa_priv.h | 4 +--
net/dsa/port.c | 6 ++--
net/dsa/slave.c | 9 +++---
net/dsa/tag_8021q.c | 4 +--
8 files changed, 59 insertions(+), 18 deletions(-)

--
2.17.1

\
 
 \ /
  Last update: 2020-07-22 12:29    [W:0.052 / U:0.452 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site