lkml.org 
[lkml]   [2020]   [Jul]   [22]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
From
Subject[PATCH v1 0/2] scsi: libsas: An improvement on error handle and tidy-up
Date
This patch introduces an improvement to reduce error handle time and a
tidy-up, including:
- postreset() is deleted from sas_sata_ops.
- Do not perform hard reset and delayed retry on a removed SATA disk. This
can effectively reduce the error handle duration of hot unplug a SATA disk
with traffic(reduce about 30s depending on the delay setting of libata).

Both John garry and Jason Yan participated in the review of the solution
and provided good suggestions during the development.

Luo Jiaxing (2):
{topost} scsi: libsas: delete postreset at sas_sata_ops
{topost} scsi: libsas: check link status at ATA prereset() ops

drivers/scsi/libsas/sas_ata.c | 17 +++++++++++++++--
1 file changed, 15 insertions(+), 2 deletions(-)

--
2.7.4

\
 
 \ /
  Last update: 2020-07-22 11:06    [W:0.184 / U:0.392 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site