Messages in this thread | | | From | <> | Subject | [PATCH v5 0/5] net: macb: Wake-on-Lan magic packet fixes and GEM handling | Date | Fri, 10 Jul 2020 14:46:40 +0200 |
| |
From: Nicolas Ferre <nicolas.ferre@microchip.com>
Hi, Here is a split series to fix WoL magic-packet on the current macb driver. Only fixes in this one based on current net/master.
Best regards, Nicolas
Changes in v5: - Addressed the error code returned by phylink_ethtool_set_wol() as suggested by Russell. If PHY handles WoL, MAC doesn't stay in the way. - Removed Florian's tag on 3/5 because of the above changes. - Correct the "Fixes" tag on 1/5.
Changes in v4: - Pure bug fix series for 'net'. GEM addition and MACB update removed: will be sent later.
Changes in v3: - Revert some of the v2 changes done in macb_resume(). Now the resume function supports in-depth re-configuration of the controller in order to deal with deeper sleep states. Basically as it was before changes introduced by this series - Tested for non-regression with our deeper Power Management mode which cuts power to the controller completely
Changes in v2: - Add patch 4/7 ("net: macb: fix macb_suspend() by removing call to netif_carrier_off()") needed for keeping phy state consistent - Add patch 5/7 ("net: macb: fix call to pm_runtime in the suspend/resume functions") that prevent putting the macb in runtime pm suspend mode when WoL is used - Collect review tags on 3 first patches from Florian: Thanks! - Review of macb_resume() function - Addition of pm_wakeup_event() in both MACB and GEM WoL IRQ handlers
Nicolas Ferre (5): net: macb: fix wakeup test in runtime suspend/resume routines net: macb: mark device wake capable when "magic-packet" property present net: macb: fix macb_get/set_wol() when moving to phylink net: macb: fix macb_suspend() by removing call to netif_carrier_off() net: macb: fix call to pm_runtime in the suspend/resume functions
drivers/net/ethernet/cadence/macb_main.c | 31 +++++++++++++++--------- 1 file changed, 19 insertions(+), 12 deletions(-)
-- 2.27.0
| |