lkml.org 
[lkml]   [2020]   [Jun]   [4]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
From
SubjectRe: [PATCH v26 04/15] dt: bindings: lp50xx: Introduce the lp50xx family of RGB drivers
On Thu, Jun 04, 2020 at 07:04:53AM -0500, Dan Murphy wrote:
> Introduce the bindings for the Texas Instruments LP5036, LP5030, LP5024,
> LP5018, LP5012 and LP5009 RGB LED device driver. The LP5036/30/24/18/12/9
> can control RGB LEDs individually or as part of a control bank group.
> These devices have the ability to adjust the mixing control for the RGB
> LEDs to obtain different colors independent of the overall brightness of
> the LED grouping.
>
> Datasheet:
> http://www.ti.com/lit/ds/symlink/lp5012.pdf
> http://www.ti.com/lit/ds/symlink/lp5024.pdf
> http://www.ti.com/lit/ds/symlink/lp5036.pdf
>
> Acked-by: Jacek Anaszewski <jacek.anaszewski@gmail.com>
> Signed-off-by: Dan Murphy <dmurphy@ti.com>
> ---
> .../devicetree/bindings/leds/leds-lp50xx.yaml | 136 ++++++++++++++++++
> 1 file changed, 136 insertions(+)
> create mode 100644 Documentation/devicetree/bindings/leds/leds-lp50xx.yaml
>
> diff --git a/Documentation/devicetree/bindings/leds/leds-lp50xx.yaml b/Documentation/devicetree/bindings/leds/leds-lp50xx.yaml
> new file mode 100644
> index 000000000000..02fcdc13262f
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/leds/leds-lp50xx.yaml
> @@ -0,0 +1,136 @@
> +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
> +%YAML 1.2
> +---
> +$id: http://devicetree.org/schemas/leds/leds-lp50xx.yaml#
> +$schema: http://devicetree.org/meta-schemas/core.yaml#
> +
> +title: LED driver for LP50XX RGB LED from Texas Instruments.
> +
> +maintainers:
> + - Dan Murphy <dmurphy@ti.com>
> +
> +description: |
> + The LP50XX is multi-channel, I2C RGB LED Drivers that can group RGB LEDs into
> + a LED group or control them individually.
> +
> + The difference in these RGB LED drivers is the number of supported RGB
> + modules.
> +
> + For more product information please see the link below:
> + http://www.ti.com/lit/ds/symlink/lp5012.pdf
> + http://www.ti.com/lit/ds/symlink/lp5024.pdf
> + http://www.ti.com/lit/ds/symlink/lp5036.pdf
> +
> +properties:
> + #allOf:
> + #- $ref: "common.yaml#"
> + #- $ref: "leds-class-multicolor.yaml#"

These describe properties in the 'multi-led' nodes, so the $ref goes
there. And you only need the 2nd one because it already references the
1st one (or it should once you fix patch 1).

> +
> + compatible:
> + enum:
> + - ti,lp5009
> + - ti,lp5012
> + - ti,lp5018
> + - ti,lp5024
> + - ti,lp5030
> + - ti,lp5036
> +
> + reg:
> + maxItems: 1
> + description:
> + I2C slave address
> + lp5009/12 - 0x14, 0x15, 0x16, 0x17
> + lp5018/24 - 0x28, 0x29, 0x2a, 0x2b
> + lp5030/36 - 0x30, 0x31, 0x32, 0x33
> +
> + enable-gpios:
> + maxItems: 1
> + description: GPIO pin to enable/disable the device.
> +
> + vled-supply:
> + description: LED supply.
> +
> + child-node:

I guess you didn't understand what I said on this. What you need is:

patternProperties:
'^multi-led@[0-9]$':
type: object
$ref: leds-class-multicolor.yaml#
properties:
...

patternProperties:
'^led@[0-9]$':
type: object
$ref: common.yaml#

Adjust '[0-9]' based on how many possible child addresses there can be.
It's hex if more than 10.

> + properties:
> + ti,led-bank:
> + description:
> + This property denotes the LED module numbers that will be controlled as
> + a single RGB cluster. Each LED module number will be controlled by a
> + single LED class instance.
> + There can only be one instance of the ti,led-bank
> + property for each device node. This is a required node if the LED
> + modules are to be banked.
> + $ref: /schemas/types.yaml#definitions/uint32-array
> +
> +required:
> + - compatible
> + - reg

additionalProperties: false

> +
> +examples:
> + - |
> + #include <dt-bindings/gpio/gpio.h>
> + #include <dt-bindings/leds/common.h>
> +
> + i2c {
> + #address-cells = <1>;
> + #size-cells = <0>;
> +
> + led-controller@14 {
> + compatible = "ti,lp5009";
> + reg = <0x14>;
> + #address-cells = <1>;
> + #size-cells = <0>;
> + enable-gpios = <&gpio1 16>;
> +
> + multi-led@1 {
> + #address-cells = <1>;
> + #size-cells = <0>;
> + reg = <1>;
> + color = <LED_COLOR_ID_MULTI>;
> + function = LED_FUNCTION_CHARGING;
> +
> + led@0 {
> + reg = <0>;
> + color = <LED_COLOR_ID_RED>;
> + };
> +
> + led@1 {
> + reg = <1>;
> + color = <LED_COLOR_ID_GREEN>;
> + };
> +
> + led@2 {
> + reg = <2>;
> + color = <LED_COLOR_ID_BLUE>;
> + };
> + };
> +
> + multi-led@2 {
> + #address-cells = <1>;
> + #size-cells = <0>;
> + reg = <2>;
> + color = <LED_COLOR_ID_MULTI>;
> + function = LED_FUNCTION_STANDBY;
> + ti,led-bank = <2 3 5>;

I still don't understand why 'reg = <2 3 5>;' with the 1st entry being
the control bank. Is '2' in reg not the same thing as '2' here?

> +
> + led@6 {
> + reg = <0x6>;
> + color = <LED_COLOR_ID_RED>;
> + led-sources = <6 9 15>;
> + };
> +
> + led@7 {
> + reg = <0x7>;
> + color = <LED_COLOR_ID_GREEN>;
> + led-sources = <7 10 16>;
> + };
> +
> + led@8 {
> + reg = <0x8>;
> + color = <LED_COLOR_ID_BLUE>;
> + led-sources = <8 11 17>;
> + };
> + };
> + };
> + };
> --
> 2.26.2
>

\
 
 \ /
  Last update: 2020-06-05 01:00    [W:1.494 / U:0.112 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site