lkml.org 
[lkml]   [2020]   [Jun]   [4]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
From
SubjectRe: [PATCH v26 06/15] dt-bindings: leds: Convert leds-lp55xx to yaml
On Thu, Jun 04, 2020 at 07:04:55AM -0500, Dan Murphy wrote:
> Convert the leds-lp55xx.txt to yaml binding.
>
> Signed-off-by: Dan Murphy <dmurphy@ti.com>
> ---
> .../devicetree/bindings/leds/leds-lp55xx.txt | 228 ------------------
> .../devicetree/bindings/leds/leds-lp55xx.yaml | 220 +++++++++++++++++
> 2 files changed, 220 insertions(+), 228 deletions(-)
> delete mode 100644 Documentation/devicetree/bindings/leds/leds-lp55xx.txt
> create mode 100644 Documentation/devicetree/bindings/leds/leds-lp55xx.yaml
>
> diff --git a/Documentation/devicetree/bindings/leds/leds-lp55xx.txt b/Documentation/devicetree/bindings/leds/leds-lp55xx.txt
> deleted file mode 100644
> index 1b66a413fb9d..000000000000
> --- a/Documentation/devicetree/bindings/leds/leds-lp55xx.txt
> +++ /dev/null
> @@ -1,228 +0,0 @@
> -Binding for TI/National Semiconductor LP55xx Led Drivers
> -
> -Required properties:
> -- compatible: one of
> - national,lp5521
> - national,lp5523
> - ti,lp55231
> - ti,lp5562
> - ti,lp8501
> -
> -- reg: I2C slave address
> -- clock-mode: Input clock mode, (0: automode, 1: internal, 2: external)
> -
> -Each child has own specific current settings
> -- led-cur: Current setting at each led channel (mA x10, 0 if led is not connected)
> -- max-cur: Maximun current at each led channel.
> -
> -Optional properties:
> -- enable-gpio: GPIO attached to the chip's enable pin
> -- label: Used for naming LEDs
> -- pwr-sel: LP8501 specific property. Power selection for output channels.
> - 0: D1~9 are connected to VDD
> - 1: D1~6 with VDD, D7~9 with VOUT
> - 2: D1~6 with VOUT, D7~9 with VDD
> - 3: D1~9 are connected to VOUT
> -
> -Alternatively, each child can have a specific channel name and trigger:
> -- chan-name (optional): name of channel
> -- linux,default-trigger (optional): see
> - Documentation/devicetree/bindings/leds/common.txt
> -
> -example 1) LP5521
> -3 LED channels, external clock used. Channel names are 'lp5521_pri:channel0',
> -'lp5521_pri:channel1' and 'lp5521_pri:channel2', with a heartbeat trigger
> -on channel 0.
> -
> -lp5521@32 {
> - compatible = "national,lp5521";
> - reg = <0x32>;
> - label = "lp5521_pri";
> - clock-mode = /bits/ 8 <2>;
> -
> - chan0 {
> - led-cur = /bits/ 8 <0x2f>;
> - max-cur = /bits/ 8 <0x5f>;
> - linux,default-trigger = "heartbeat";
> - };
> -
> - chan1 {
> - led-cur = /bits/ 8 <0x2f>;
> - max-cur = /bits/ 8 <0x5f>;
> - };
> -
> - chan2 {
> - led-cur = /bits/ 8 <0x2f>;
> - max-cur = /bits/ 8 <0x5f>;
> - };
> -};
> -
> -example 2) LP5523
> -9 LED channels with specific name. Internal clock used.
> -The I2C slave address is configurable with ASEL1 and ASEL0 pins.
> -Available addresses are 32/33/34/35h.
> -
> -ASEL1 ASEL0 Address
> --------------------------
> - GND GND 32h
> - GND VEN 33h
> - VEN GND 34h
> - VEN VEN 35h
> -
> -lp5523@32 {
> - compatible = "national,lp5523";
> - reg = <0x32>;
> - clock-mode = /bits/ 8 <1>;
> -
> - chan0 {
> - chan-name = "d1";
> - led-cur = /bits/ 8 <0x14>;
> - max-cur = /bits/ 8 <0x20>;
> - };
> -
> - chan1 {
> - chan-name = "d2";
> - led-cur = /bits/ 8 <0x14>;
> - max-cur = /bits/ 8 <0x20>;
> - };
> -
> - chan2 {
> - chan-name = "d3";
> - led-cur = /bits/ 8 <0x14>;
> - max-cur = /bits/ 8 <0x20>;
> - };
> -
> - chan3 {
> - chan-name = "d4";
> - led-cur = /bits/ 8 <0x14>;
> - max-cur = /bits/ 8 <0x20>;
> - };
> -
> - chan4 {
> - chan-name = "d5";
> - led-cur = /bits/ 8 <0x14>;
> - max-cur = /bits/ 8 <0x20>;
> - };
> -
> - chan5 {
> - chan-name = "d6";
> - led-cur = /bits/ 8 <0x14>;
> - max-cur = /bits/ 8 <0x20>;
> - };
> -
> - chan6 {
> - chan-name = "d7";
> - led-cur = /bits/ 8 <0x14>;
> - max-cur = /bits/ 8 <0x20>;
> - };
> -
> - chan7 {
> - chan-name = "d8";
> - led-cur = /bits/ 8 <0x14>;
> - max-cur = /bits/ 8 <0x20>;
> - };
> -
> - chan8 {
> - chan-name = "d9";
> - led-cur = /bits/ 8 <0x14>;
> - max-cur = /bits/ 8 <0x20>;
> - };
> -};
> -
> -example 3) LP5562
> -4 channels are defined.
> -
> -lp5562@30 {
> - compatible = "ti,lp5562";
> - reg = <0x30>;
> - clock-mode = /bits/8 <2>;
> -
> - chan0 {
> - chan-name = "R";
> - led-cur = /bits/ 8 <0x20>;
> - max-cur = /bits/ 8 <0x60>;
> - };
> -
> - chan1 {
> - chan-name = "G";
> - led-cur = /bits/ 8 <0x20>;
> - max-cur = /bits/ 8 <0x60>;
> - };
> -
> - chan2 {
> - chan-name = "B";
> - led-cur = /bits/ 8 <0x20>;
> - max-cur = /bits/ 8 <0x60>;
> - };
> -
> - chan3 {
> - chan-name = "W";
> - led-cur = /bits/ 8 <0x20>;
> - max-cur = /bits/ 8 <0x60>;
> - };
> -};
> -
> -example 4) LP8501
> -9 channels are defined. The 'pwr-sel' is LP8501 specific property.
> -Others are same as LP5523.
> -
> -lp8501@32 {
> - compatible = "ti,lp8501";
> - reg = <0x32>;
> - clock-mode = /bits/ 8 <2>;
> - pwr-sel = /bits/ 8 <3>; /* D1~9 connected to VOUT */
> -
> - chan0 {
> - chan-name = "d1";
> - led-cur = /bits/ 8 <0x14>;
> - max-cur = /bits/ 8 <0x20>;
> - };
> -
> - chan1 {
> - chan-name = "d2";
> - led-cur = /bits/ 8 <0x14>;
> - max-cur = /bits/ 8 <0x20>;
> - };
> -
> - chan2 {
> - chan-name = "d3";
> - led-cur = /bits/ 8 <0x14>;
> - max-cur = /bits/ 8 <0x20>;
> - };
> -
> - chan3 {
> - chan-name = "d4";
> - led-cur = /bits/ 8 <0x14>;
> - max-cur = /bits/ 8 <0x20>;
> - };
> -
> - chan4 {
> - chan-name = "d5";
> - led-cur = /bits/ 8 <0x14>;
> - max-cur = /bits/ 8 <0x20>;
> - };
> -
> - chan5 {
> - chan-name = "d6";
> - led-cur = /bits/ 8 <0x14>;
> - max-cur = /bits/ 8 <0x20>;
> - };
> -
> - chan6 {
> - chan-name = "d7";
> - led-cur = /bits/ 8 <0x14>;
> - max-cur = /bits/ 8 <0x20>;
> - };
> -
> - chan7 {
> - chan-name = "d8";
> - led-cur = /bits/ 8 <0x14>;
> - max-cur = /bits/ 8 <0x20>;
> - };
> -
> - chan8 {
> - chan-name = "d9";
> - led-cur = /bits/ 8 <0x14>;
> - max-cur = /bits/ 8 <0x20>;
> - };
> -};
> diff --git a/Documentation/devicetree/bindings/leds/leds-lp55xx.yaml b/Documentation/devicetree/bindings/leds/leds-lp55xx.yaml
> new file mode 100644
> index 000000000000..9d6ded5fbc14
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/leds/leds-lp55xx.yaml
> @@ -0,0 +1,220 @@
> +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
> +%YAML 1.2
> +---
> +$id: http://devicetree.org/schemas/leds/leds-lp55xx.yaml#
> +$schema: http://devicetree.org/meta-schemas/core.yaml#
> +
> +title: TI/National Semiconductor LP55xx and LP8501 LED Drivers
> +
> +maintainers:
> + - Jacek Anaszewski <jacek.anaszewski@gmail.com>
> + - Pavel Machek <pavel@ucw.cz>
> +
> +description: |
> + Bindings for the TI/National Semiconductor LP55xx and LP8501 multi channel
> + LED Drivers.
> +
> + For more product information please see the link below:
> + https://www.ti.com/lit/gpn/lp5521
> + https://www.ti.com/lit/gpn/lp5523
> + https://www.ti.com/lit/gpn/lp55231
> + https://www.ti.com/lit/gpn/lp5562
> + https://www.ti.com/lit/gpn/lp8501
> +
> +properties:
> + #allOf:
> + #- $ref: "common.yaml#"
> + #- $ref: "leds-class-multicolor.yaml#"
> +
> + compatible:
> + enum:
> + - national,lp5521
> + - national,lp5523
> + - ti,lp55231
> + - ti,lp5562
> + - ti,lp8501
> +
> + reg:
> + maxItems: 1
> + description: I2C slave address
> +
> + clock-mode:
> + $ref: /schemas/types.yaml#definitions/uint8
> + maxItems: 1

'maxItems' is for an array. This is a scalar, so drop.

> + description: |
> + Input clock mode
> + 0 - automode
> + 1 - internal
> + 2 - external

enum:
- 0 # automode
- 1
- 2


> +
> + enable-gpio:
> + maxItems: 1
> + description: |
> + GPIO attached to the chip's enable pin
> +
> + pwr-sel:
> + $ref: /schemas/types.yaml#definitions/uint8
> + maxItems: 1
> + description: |
> + LP8501 specific property. Power selection for output channels.
> + 0 - D1~9 are connected to VDD
> + 1 - D1~6 with VDD, D7~9 with VOUT
> + 2 - D1~6 with VOUT, D7~9 with VDD
> + 3 - D1~9 are connected to VOUT

Similarly here, make this a schema.

> +
> + child-node:

This needs to be a pattern matching the child nodes' names.

> + type: object
> + properties:
> + led-cur:
> + $ref: /schemas/types.yaml#definitions/uint8
> + maxItems: 1

Not an array.

> + description: |
> + Current setting at each LED channel (mA x10, 0 if LED is not connected)

0-255 are valid values?

> +
> + max-cur:
> + $ref: /schemas/types.yaml#definitions/uint8
> + maxItems: 1
> + description: Maximun current at each LED channel.
> +
> + reg:
> + maxItems: 1
> + description: |
> + Output channel for the LED. This is zero based channel identifier and
> + the data sheet is a one based channel identifier.
> + reg value to output to LED output number
> + D1 = reg value is 0
> + D2 = reg value is 1
> + D3 = reg value is 2
> + D4 = reg value is 3
> + D5 = reg value is 4
> + D6 = reg value is 5
> + D7 = reg value is 6
> + D8 = reg value is 7
> + D9 = reg value is 8
> +
> + chan-name:
> + $ref: /schemas/types.yaml#definitions/string
> + description: name of channel
> +
> +required:
> + - compatible
> + - reg
> +
> +examples:
> + - |
> + #include <dt-bindings/leds/common.h>
> +
> + i2c {
> + #address-cells = <1>;
> + #size-cells = <0>;
> +
> + led-controller@32 {
> + #address-cells = <1>;
> + #size-cells = <0>;
> + compatible = "ti,lp8501";
> + reg = <0x32>;
> + clock-mode = /bits/ 8 <2>;
> + pwr-sel = /bits/ 8 <3>; /* D1~9 connected to VOUT */
> +
> + led@0 {
> + reg = <0>;
> + chan-name = "d1";
> + led-cur = /bits/ 8 <0x14>;
> + max-cur = /bits/ 8 <0x20>;
> + };
> +
> + led@1 {
> + reg = <1>;
> + chan-name = "d2";
> + led-cur = /bits/ 8 <0x14>;
> + max-cur = /bits/ 8 <0x20>;
> + };
> +
> + led@2 {
> + reg = <2>;
> + chan-name = "d3";
> + led-cur = /bits/ 8 <0x14>;
> + max-cur = /bits/ 8 <0x20>;
> + };
> +
> + led@3 {
> + reg = <3>;
> + chan-name = "d4";
> + led-cur = /bits/ 8 <0x14>;
> + max-cur = /bits/ 8 <0x20>;
> + };
> +
> + led@4 {
> + reg = <4>;
> + chan-name = "d5";
> + led-cur = /bits/ 8 <0x14>;
> + max-cur = /bits/ 8 <0x20>;
> + };
> +
> + led@5 {
> + reg = <5>;
> + chan-name = "d6";
> + led-cur = /bits/ 8 <0x14>;
> + max-cur = /bits/ 8 <0x20>;
> + };
> +
> + led@6 {
> + reg = <6>;
> + chan-name = "d7";
> + led-cur = /bits/ 8 <0x14>;
> + max-cur = /bits/ 8 <0x20>;
> + };
> +
> + led@7 {
> + reg = <7>;
> + chan-name = "d8";
> + led-cur = /bits/ 8 <0x14>;
> + max-cur = /bits/ 8 <0x20>;
> + };
> +
> + led@8 {
> + reg = <8>;
> + chan-name = "d9";
> + led-cur = /bits/ 8 <0x14>;
> + max-cur = /bits/ 8 <0x20>;
> + };
> + };
> +
> + led-controller@33 {
> + #address-cells = <1>;
> + #size-cells = <0>;
> + compatible = "national,lp5523";
> + reg = <0x33>;
> + clock-mode = /bits/ 8 <0>;
> +
> + multi-led@2 {
> + #address-cells = <1>;
> + #size-cells = <0>;
> + reg = <0x2>;
> + color = <LED_COLOR_ID_MULTI>;
> + function = LED_FUNCTION_STANDBY;
> + linux,default-trigger = "heartbeat";
> +
> + led@0 {
> + led-cur = /bits/ 8 <50>;
> + max-cur = /bits/ 8 <100>;
> + reg = <0x0>;
> + color = <LED_COLOR_ID_GREEN>;
> + };
> +
> + led@1 {
> + led-cur = /bits/ 8 <50>;
> + max-cur = /bits/ 8 <100>;
> + reg = <0x1>;
> + color = <LED_COLOR_ID_BLUE>;
> + };
> +
> + led@6 {
> + led-cur = /bits/ 8 <50>;
> + max-cur = /bits/ 8 <100>;
> + reg = <0x6>;
> + color = <LED_COLOR_ID_RED>;
> + };
> + };
> + };
> + };
> --
> 2.26.2
>

\
 
 \ /
  Last update: 2020-06-05 01:13    [W:0.128 / U:0.052 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site