lkml.org 
[lkml]   [2020]   [Jun]   [3]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH] efi/libstub: refactor Makefile to not use lib-y syntax
Date
Documentation/kbuild/makefiles.rst says:

Use of lib-y is normally restricted to `lib/` and `arch/*/lib`.

I want to disallow lib-y outside of them.

Add a custom rule to build lib.a, which is linked to the decompressor
for ARCH=x86, ARCH=arm.

For ARCH=arm64, use obj-y to link objects to vmlinux in the ordinary
way.

Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
---

arch/arm64/Makefile | 1 -
drivers/firmware/efi/Makefile | 2 +-
drivers/firmware/efi/libstub/Makefile | 51 +++++++++++++++------------
3 files changed, 30 insertions(+), 24 deletions(-)

diff --git a/arch/arm64/Makefile b/arch/arm64/Makefile
index 650e1185c190..ab79b20efc8d 100644
--- a/arch/arm64/Makefile
+++ b/arch/arm64/Makefile
@@ -145,7 +145,6 @@ export TEXT_OFFSET

core-y += arch/arm64/
libs-y := arch/arm64/lib/ $(libs-y)
-core-$(CONFIG_EFI_STUB) += $(objtree)/drivers/firmware/efi/libstub/lib.a

# Default target when executing plain make
boot := arch/arm64/boot
diff --git a/drivers/firmware/efi/Makefile b/drivers/firmware/efi/Makefile
index 7a216984552b..317a05cd388b 100644
--- a/drivers/firmware/efi/Makefile
+++ b/drivers/firmware/efi/Makefile
@@ -20,7 +20,7 @@ obj-$(CONFIG_EFI_VARS_PSTORE) += efi-pstore.o
obj-$(CONFIG_UEFI_CPER) += cper.o
obj-$(CONFIG_EFI_RUNTIME_MAP) += runtime-map.o
obj-$(CONFIG_EFI_RUNTIME_WRAPPERS) += runtime-wrappers.o
-subdir-$(CONFIG_EFI_STUB) += libstub
+obj-$(CONFIG_EFI_STUB) += libstub/
obj-$(CONFIG_EFI_FAKE_MEMMAP) += fake_map.o
obj-$(CONFIG_EFI_BOOTLOADER_CONTROL) += efibc.o
obj-$(CONFIG_EFI_TEST) += test/
diff --git a/drivers/firmware/efi/libstub/Makefile b/drivers/firmware/efi/libstub/Makefile
index cce4a7436052..e4e9b17fa3b2 100644
--- a/drivers/firmware/efi/libstub/Makefile
+++ b/drivers/firmware/efi/libstub/Makefile
@@ -44,7 +44,7 @@ OBJECT_FILES_NON_STANDARD := y
# Prevents link failures: __sanitizer_cov_trace_pc() is not linked in.
KCOV_INSTRUMENT := n

-lib-y := efi-stub-helper.o gop.o secureboot.o tpm.o \
+stub-obj-y := efi-stub-helper.o gop.o secureboot.o tpm.o \
file.o mem.o random.o randomalloc.o pci.o \
skip_spaces.o lib-cmdline.o lib-ctype.o \
alignedmem.o relocate.o vsprintf.o
@@ -55,15 +55,19 @@ efi-deps-y := fdt_rw.c fdt_ro.c fdt_wip.c fdt.c fdt_empty_tree.c fdt_sw.c
$(obj)/lib-%.o: $(srctree)/lib/%.c FORCE
$(call if_changed_rule,cc_o_c)

-lib-$(CONFIG_EFI_GENERIC_STUB) += efi-stub.o fdt.o string.o \
+stub-obj-$(CONFIG_EFI_GENERIC_STUB) += efi-stub.o fdt.o string.o \
$(patsubst %.c,lib-%.o,$(efi-deps-y))

-lib-$(CONFIG_ARM) += arm32-stub.o
-lib-$(CONFIG_ARM64) += arm64-stub.o
-lib-$(CONFIG_X86) += x86-stub.o
+stub-obj-$(CONFIG_ARM) += arm32-stub.o
+stub-obj-$(CONFIG_ARM64) += arm64-stub.o
+stub-obj-$(CONFIG_X86) += x86-stub.o
CFLAGS_arm32-stub.o := -DTEXT_OFFSET=$(TEXT_OFFSET)
CFLAGS_arm64-stub.o := -DTEXT_OFFSET=$(TEXT_OFFSET)

+targets += $(stub-obj-y)
+stub-obj-y := $(patsubst %.o,%.stub.o, $(stub-obj-y))
+targets += $(stub-obj-y)
+
#
# For x86, bootloaders like systemd-boot or grub-efi do not zero-initialize the
# .bss section, so the .bss section of the EFI stub needs to be included in the
@@ -83,23 +87,6 @@ STUBCOPY_FLAGS-$(CONFIG_ARM) += --rename-section .data=.data.efistub \
--rename-section .bss=.bss.efistub,load,alloc
STUBCOPY_RELOC-$(CONFIG_ARM) := R_ARM_ABS

-#
-# arm64 puts the stub in the kernel proper, which will unnecessarily retain all
-# code indefinitely unless it is annotated as __init/__initdata/__initconst etc.
-# So let's apply the __init annotations at the section level, by prefixing
-# the section names directly. This will ensure that even all the inline string
-# literals are covered.
-# The fact that the stub and the kernel proper are essentially the same binary
-# also means that we need to be extra careful to make sure that the stub does
-# not rely on any absolute symbol references, considering that the virtual
-# kernel mapping that the linker uses is not active yet when the stub is
-# executing. So build all C dependencies of the EFI stub into libstub, and do
-# a verification pass to see if any absolute relocations exist in any of the
-# object files.
-#
-extra-y := $(lib-y)
-lib-y := $(patsubst %.o,%.stub.o,$(lib-y))
-
STUBCOPY_FLAGS-$(CONFIG_ARM64) += --prefix-alloc-sections=.init \
--prefix-symbols=__efistub_
STUBCOPY_RELOC-$(CONFIG_ARM64) := R_AARCH64_ABS
@@ -121,3 +108,23 @@ quiet_cmd_stubcopy = STUBCPY $@
/bin/false; \
fi; \
$(OBJCOPY) $(STUBCOPY_FLAGS-y) $< $@
+
+# arm64 puts the stub in the kernel proper, which will unnecessarily retain all
+# code indefinitely unless it is annotated as __init/__initdata/__initconst etc.
+# So let's apply the __init annotations at the section level, by prefixing
+# the section names directly. This will ensure that even all the inline string
+# literals are covered.
+# The fact that the stub and the kernel proper are essentially the same binary
+# also means that we need to be extra careful to make sure that the stub does
+# not rely on any absolute symbol references, considering that the virtual
+# kernel mapping that the linker uses is not active yet when the stub is
+# executing. So build all C dependencies of the EFI stub into libstub, and do
+# a verification pass to see if any absolute relocations exist in any of the
+# object files.
+#
+obj-$(CONFIG_ARM64) += $(stub-obj-y)
+extra-$(CONFIG_ARM) += lib.a
+extra-$(CONFIG_X86) += lib.a
+
+$(obj)/lib.a: $(addprefix $(obj)/, $(stub-obj-y)) FORCE
+ $(call if_changed,ar)
--
2.25.1
\
 
 \ /
  Last update: 2020-06-03 07:35    [W:1.013 / U:0.052 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site