lkml.org 
[lkml]   [2020]   [Jun]   [29]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
From
SubjectRe: [PATCH v9 1/3] dt-bindings: phy: Add DT bindings for Xilinx ZynqMP PSGTR PHY
On Mon, 29 Jun 2020 15:00:52 +0300, Laurent Pinchart wrote:
> From: Anurag Kumar Vulisha <anurag.kumar.vulisha@xilinx.com>
>
> Add DT bindings for the Xilinx ZynqMP PHY. ZynqMP SoCs have a High Speed
> Processing System Gigabit Transceiver which provides PHY capabilities to
> USB, SATA, PCIE, Display Port and Ehernet SGMII controllers.
>
> Signed-off-by: Anurag Kumar Vulisha <anurag.kumar.vulisha@xilinx.com>
> Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
> Reviewed-by: Rob Herring <robh@kernel.org>
> ---
> Changes since v8:
>
> - Rebase on phy/next
>
> Changes since v7:
>
> - Switch to GPL-2.0-only OR BSD-2-Clause
>
> Changes since v6:
>
> - Fixed specification of compatible-dependent xlnx,tx-termination-fix
> property
> - Dropped status property from example
> - Use 4 spaces to indent example
>
> Changes since v5:
>
> - Document clocks and clock-names properties
> - Document resets and reset-names properties
> - Replace subnodes with an additional entry in the PHY cells
> - Drop lane frequency PHY cell, replaced by reference clock phandle
> - Convert bindings to YAML
> - Reword the subject line
> - Drop Rob's R-b as the bindings have significantly changed
> - Drop resets and reset-names properties
> ---
> .../bindings/phy/xlnx,zynqmp-psgtr.yaml | 105 ++++++++++++++++++
> include/dt-bindings/phy/phy.h | 1 +
> 2 files changed, 106 insertions(+)
> create mode 100644 Documentation/devicetree/bindings/phy/xlnx,zynqmp-psgtr.yaml
>


My bot found errors running 'make dt_binding_check' on your patch:

/builds/robherring/linux-dt-review/Documentation/devicetree/bindings/phy/xlnx,zynqmp-psgtr.example.dt.yaml: example-0: phy@fd400000:reg:0: [0, 4248829952, 0, 262144] is too long
/builds/robherring/linux-dt-review/Documentation/devicetree/bindings/phy/xlnx,zynqmp-psgtr.example.dt.yaml: example-0: phy@fd400000:reg:1: [0, 4248633344, 0, 4096] is too long


See https://patchwork.ozlabs.org/patch/1319269

If you already ran 'make dt_binding_check' and didn't see the above
error(s), then make sure dt-schema is up to date:

pip3 install git+https://github.com/devicetree-org/dt-schema.git@master --upgrade

Please check and re-submit.

\
 
 \ /
  Last update: 2020-06-30 00:34    [W:0.165 / U:0.200 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site