Messages in this thread | | | From | Laurent Pinchart <> | Subject | [PATCH v9 0/3] phy: zynqmp: Add PHY driver for the Xilinx ZynqMP Gigabit Transceiver | Date | Mon, 29 Jun 2020 15:00:51 +0300 |
| |
Hello,
The patch series adds a PHY driver for the Xilinx ZynqMP gigabit serial transceivers (PS-GTR). The PS-GTR is a set of 4 PHYs that can be used by the PCIe, USB 3.0, DisplayPort, SATA and Ethernet controllers that are part of the Serial I/O Unit (SIOU).
The code is based on a previous version sent by Anurag Kumar Vulisha and available at [1]. The DT bindings have been converted to YAML, and both the bindings and the driver have been considerably reworked (and simplified). The most notable changes is the removal of manual handling of the reset lines of the PHY users (which belongs to the PHY users themselves), and moving to the standard PHY .power_on() and .configure() operations to replace functions that were previously exported by the driver. Please see individual patches for a more detailed changelog.
Compared to v8, the series has been rebased on phy/next, and a minor issue in MAINTAINERS has been fixed.
[1] https://patchwork.kernel.org/cover/10735681/
Anurag Kumar Vulisha (2): dt-bindings: phy: Add DT bindings for Xilinx ZynqMP PSGTR PHY phy: zynqmp: Add PHY driver for the Xilinx ZynqMP Gigabit Transceiver
Laurent Pinchart (1): arm64: dts: zynqmp: Add GTR transceivers
.../bindings/phy/xlnx,zynqmp-psgtr.yaml | 105 ++ MAINTAINERS | 9 + arch/arm64/boot/dts/xilinx/zynqmp.dtsi | 10 + drivers/phy/Kconfig | 1 + drivers/phy/Makefile | 3 +- drivers/phy/xilinx/Kconfig | 13 + drivers/phy/xilinx/Makefile | 3 + drivers/phy/xilinx/phy-zynqmp.c | 995 ++++++++++++++++++ include/dt-bindings/phy/phy.h | 1 + 9 files changed, 1139 insertions(+), 1 deletion(-) create mode 100644 Documentation/devicetree/bindings/phy/xlnx,zynqmp-psgtr.yaml create mode 100644 drivers/phy/xilinx/Kconfig create mode 100644 drivers/phy/xilinx/Makefile create mode 100644 drivers/phy/xilinx/phy-zynqmp.c
-- Regards,
Laurent Pinchart
| |