lkml.org 
[lkml]   [2020]   [Jun]   [27]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
SubjectRe: [PATCH v2 4/7] ASoC: qcom: lpass: Use regmap_field for i2sctl and dmactl registers
From
Date
Thanks Srini for reviewing the change.


On 5/18/2020 3:19 PM, Srinivas Kandagatla wrote:
>
>
> On 14/05/2020 17:38, Ajit Pandey wrote:
>> I2SCTL and DMACTL registers has different bits alignment for newer
>> LPASS variants of SC7180 soc. Instead of adding extra overhead for
>> calculating masks and shifts for newer variants registers layout we
>> changed the approach to use regmap_field_write() API to update bit.
>> Such API's will internally do the required bit shift and mask based
>> on reg_field struct defined for bit fields. We'll define REG_FIELD()
>> macros with bit layout for both lpass variants and use such macros
>> to initialize register fields in variant specific driver callbacks.
>> Also added new bitfieds values for I2SCTL and DMACTL registers and
>> removed shifts and mask macros for such registers from header file.
>>
>> Signed-off-by: Ajit Pandey <ajitp@codeaurora.org>
>> ---
>>   sound/soc/qcom/lpass-apq8016.c   |  61 ++++++++++++
>>   sound/soc/qcom/lpass-cpu.c       | 114 +++++++++++++---------
>>   sound/soc/qcom/lpass-lpaif-reg.h | 203
>> ++++++++++++++++++++++++---------------
>>   sound/soc/qcom/lpass-platform.c  |  86 +++++++++++------
>>   sound/soc/qcom/lpass.h           |  30 ++++++
>>   5 files changed, 340 insertions(+), 154 deletions(-)
>>
>
> Thanks for moving this to regmap fields, looks clean!
> However this patch just removed support to lpass-ipq806x.c variant,
> which should to be taken care of while doing patches that apply to all
> variants.
>
Right. I will make the change as part of next patchset.
>
>> diff --git a/sound/soc/qcom/lpass-apq8016.c
>> b/sound/soc/qcom/lpass-apq8016.c
>> index 8210e37..3149645 100644
>> --- a/sound/soc/qcom/lpass-apq8016.c
>> +++ b/sound/soc/qcom/lpass-apq8016.c
>> @@ -124,6 +124,32 @@
>>       },
>>   };
>>   +static int apq8016_init_dmactl_bitfields(struct lpaif_dmactl *dmactl,
>> +                     struct regmap *map,
>> +                     unsigned int reg)
>> +{
>> +    struct reg_field bursten = DMACTL_BURSTEN_FLD(reg);
>> +    struct reg_field wpscnt = DMACTL_WPSCNT_FLD(reg);
>> +    struct reg_field fifowm = DMACTL_FIFOWM_FLD(reg);
>> +    struct reg_field intf = DMACTL_AUDINTF_FLD(reg);
>> +    struct reg_field enable = DMACTL_ENABLE_FLD(reg);
>> +    struct reg_field dyncclk = DMACTL_DYNCLK_FLD(reg);
>> +
>> +    dmactl->bursten = regmap_field_alloc(map, bursten);
>> +    dmactl->wpscnt = regmap_field_alloc(map, wpscnt);
>> +    dmactl->fifowm = regmap_field_alloc(map, fifowm);
>> +    dmactl->intf = regmap_field_alloc(map, intf);
>> +    dmactl->enable = regmap_field_alloc(map, enable);
>> +    dmactl->dyncclk = regmap_field_alloc(map, dyncclk);
>
> My idea was to move this all regmap fields to variant structure and
> common code will do the regmap_filed_alloc rather than each variant
> duplicating the same code for each variant, also am guessing some of
> the members in the lpass_variant structure tp become redundant due to
> regmap field which can be removed as well.
>
> ex :
>
> struct lpass_variant {
>     ...
>     struct reg_field bursten
>     ...
> };
>
> in lpass-apq8016.c
>
> we do
> static struct lpass_variant apq8016_data = {
>
>     .bursten = REG_FIELD(reg, 11, 11),
>     ...
> }
>
We can keep reg_field in lpass_variant, but assignment in the struct
will be a problem as

reg is variable here. So, we need to expose an API in lpass_variant to
assign reg_field.

regmap_field will still be in dmactl/i2sctl structs as it differs for
different dma channel/i2s port

respectively. Please share your thoughts.

> in lpass-cpu.c we can do the real regmap_field_alloc
> asoc_qcom_lpass_cpu_platform_probe
>
Yes, I will move regmap_field_alloc to lpass_cpu.c in next patchset.
>
>
>> +
>> +    if (IS_ERR(dmactl->bursten) || IS_ERR(dmactl->wpscnt) ||
>> +        IS_ERR(dmactl->fifowm) || IS_ERR(dmactl->intf) ||
>> +        IS_ERR(dmactl->enable) || IS_ERR(dmactl->dyncclk))
>> +        return -EINVAL;
>> +
>> +    return 0;
>> +}
>> +
>>   static int apq8016_lpass_alloc_dma_channel(struct lpass_data *drvdata,
>>                          int direction)
>>   {
>> @@ -158,6 +184,39 @@ static int apq8016_lpass_free_dma_channel(struct
>> lpass_data *drvdata, int chan)
>>       return 0;
>>   }
>>   +static int sc7180_init_i2sctl_bitfields(struct lpaif_i2sctl *i2sctl,
>> +                    struct regmap *map, unsigned int reg)
>> +{
> Should this be apq8016_init_i2sctl_bitfields
>
> Please make sure that you compile the code before sending it out!
>
Will take care in next patchset.

>
> --srini
>
>>
Thanks,

Rohit

--
Qualcomm INDIA, on behalf of Qualcomm Innovation Center, Inc.is a member
of the Code Aurora Forum, hosted by the Linux Foundation.

\
 
 \ /
  Last update: 2020-06-27 20:03    [W:0.214 / U:0.168 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site