lkml.org 
[lkml]   [2020]   [Jun]   [2]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
SubjectRe: [PATCH net-next v5 4/4] net: dp83869: Add RGMII internal delay configuration
From
Date


On 6/2/2020 4:10 PM, Dan Murphy wrote:
> Florian
>
> On 6/2/20 5:33 PM, Florian Fainelli wrote:
>>
>> On 6/2/2020 9:45 AM, Dan Murphy wrote:
>>> Add RGMII internal delay configuration for Rx and Tx.
>>>
>>> Signed-off-by: Dan Murphy <dmurphy@ti.com>
>>> ---
>> [snip]
>>
>>> +
>>>   enum {
>>>       DP83869_PORT_MIRRORING_KEEP,
>>>       DP83869_PORT_MIRRORING_EN,
>>> @@ -108,6 +113,8 @@ enum {
>>>   struct dp83869_private {
>>>       int tx_fifo_depth;
>>>       int rx_fifo_depth;
>>> +    s32 rx_id_delay;
>>> +    s32 tx_id_delay;
>>>       int io_impedance;
>>>       int port_mirroring;
>>>       bool rxctrl_strap_quirk;
>>> @@ -232,6 +239,22 @@ static int dp83869_of_init(struct phy_device
>>> *phydev)
>>>                    &dp83869->tx_fifo_depth))
>>>           dp83869->tx_fifo_depth = DP83869_PHYCR_FIFO_DEPTH_4_B_NIB;
>>>   +    ret = of_property_read_u32(of_node, "rx-internal-delay-ps",
>>> +                   &dp83869->rx_id_delay);
>>> +    if (ret) {
>>> +        dp83869->rx_id_delay =
>>> +                dp83869_internal_delay[DP83869_CLK_DELAY_DEF];
>>> +        ret = 0;
>>> +    }
>>> +
>>> +    ret = of_property_read_u32(of_node, "tx-internal-delay-ps",
>>> +                   &dp83869->tx_id_delay);
>>> +    if (ret) {
>>> +        dp83869->tx_id_delay =
>>> +                dp83869_internal_delay[DP83869_CLK_DELAY_DEF];
>>> +        ret = 0;
>>> +    }
>> It is still not clear to me why is not the parsing being done by the PHY
>> library helper directly?
>
> Why would we do that for these properties and not any other?

Those properties have a standard name, which makes them suitable for
parsing by the core PHY library.

>
> Unless there is a new precedence being set here by having the PHY
> framework do all the dt node parsing for common properties.

You could parse the vendor properties through the driver, let the PHY
library parse the standard properties, and resolve any ordering
precedence within the driver. In general, I would favor standard
properties over vendor properties.

Does this help?
--
Florian

\
 
 \ /
  Last update: 2020-06-03 01:14    [W:0.105 / U:0.180 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site