lkml.org 
[lkml]   [2020]   [Jun]   [16]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
SubjectRe: [PATCH 1/2] i2c: designware: Only check the first byte for SMBus block read length
From
Date
On 6/15/20 12:02 AM, Sultan Alsawaf wrote:
> From: Sultan Alsawaf <sultan@kerneltoast.com>
>
> SMBus block reads can be broken because the read function will just skip
> over bytes it doesn't like until reaching a byte that conforms to the
> length restrictions for block reads. This is problematic when it isn't
> known if the incoming payload is indeed a conforming block read.
>
> According to the SMBus specification, block reads will only send the
> payload length in the first byte, so we can fix this by only considering
> the first byte in a sequence for block read length purposes.
>
> Fixes: c3ae106050b9 ("i2c: designware: Implement support for SMBus block read and write")
> Signed-off-by: Sultan Alsawaf <sultan@kerneltoast.com>
> ---
> drivers/i2c/busses/i2c-designware-master.c | 10 +++++-----
> 1 file changed, 5 insertions(+), 5 deletions(-)
>
> diff --git a/drivers/i2c/busses/i2c-designware-master.c b/drivers/i2c/busses/i2c-designware-master.c
> index d6425ad6e6a3..16d38b8fc19a 100644
> --- a/drivers/i2c/busses/i2c-designware-master.c
> +++ b/drivers/i2c/busses/i2c-designware-master.c
> @@ -398,7 +398,6 @@ i2c_dw_recv_len(struct dw_i2c_dev *dev, u8 len)
> len += (flags & I2C_CLIENT_PEC) ? 2 : 1;
> dev->tx_buf_len = len - min_t(u8, len, dev->rx_outstanding);
> msgs[dev->msg_read_idx].len = len;
> - msgs[dev->msg_read_idx].flags &= ~I2C_M_RECV_LEN;
>
> return len;
> }

Please update the comment about masking the flag a few lines above this
change.

> @@ -430,10 +429,11 @@ i2c_dw_read(struct dw_i2c_dev *dev)
> u32 flags = msgs[dev->msg_read_idx].flags;
>
> regmap_read(dev->map, DW_IC_DATA_CMD, &tmp);
> - /* Ensure length byte is a valid value */
> - if (flags & I2C_M_RECV_LEN &&
> - tmp <= I2C_SMBUS_BLOCK_MAX && tmp > 0) {
> - len = i2c_dw_recv_len(dev, tmp);
> + if (flags & I2C_M_RECV_LEN) {
> + /* Ensure length byte is a valid value */
> + if (tmp <= I2C_SMBUS_BLOCK_MAX && tmp > 0)
> + len = i2c_dw_recv_len(dev, tmp);
> + msgs[dev->msg_read_idx].flags &= ~I2C_M_RECV_LEN;
> }
> *buf++ = tmp;
> dev->rx_outstanding--;

With above comment change this looks good to me.

--
Jarkko

\
 
 \ /
  Last update: 2020-06-16 15:23    [W:0.608 / U:0.016 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site