lkml.org 
[lkml]   [2020]   [Jun]   [15]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
From
Date
SubjectRe: [PATCH 1/2] i2c: designware: Only check the first byte for SMBus block read length
On Mon, Jun 15, 2020 at 7:06 PM Sultan Alsawaf <sultan@kerneltoast.com> wrote:
> On Mon, Jun 15, 2020 at 12:40:19PM +0300, Andy Shevchenko wrote:
> > On Sun, Jun 14, 2020 at 02:02:54PM -0700, Sultan Alsawaf wrote:
> > > From: Sultan Alsawaf <sultan@kerneltoast.com>
> > >
> > > SMBus block reads can be broken because the read function will just skip
> > > over bytes it doesn't like until reaching a byte that conforms to the
> > > length restrictions for block reads. This is problematic when it isn't
> > > known if the incoming payload is indeed a conforming block read.
> > >
> > > According to the SMBus specification, block reads will only send the
> > > payload length in the first byte, so we can fix this by only considering
> > > the first byte in a sequence for block read length purposes.
> >
> > I'm wondering if this overlaps with [1]. AFAIU that one is also makes sure that
> > the length is not a garbage.
> >
> > [1]: https://lore.kernel.org/linux-i2c/20200613104109.2989-1-mans@mansr.com/T/#u
>
> No overlap.

Thanks for clarifying.

> That looks like a similar bug for a different driver. In my case,
> the adapter provides native SMBus support, so emulation is never used. This is
> clear to see by looking at i2c_transfer_buffer_flags(), which only uses the
> master_xfer functions provided by the adapter; it doesn't call the emulation
> path at all.

But do we get an advantage if this can be done in the i2c core instead
(once for all)?

--
With Best Regards,
Andy Shevchenko

\
 
 \ /
  Last update: 2020-06-15 18:09    [W:0.428 / U:0.180 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site