lkml.org 
[lkml]   [2020]   [Jun]   [16]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
SubjectRe: [PATCH v6 1/5] dt-bindings: msm/dp: add bindings of DP/DP-PLL driver for Snapdragon
From
Date
Quoting Tanmay Shah (2020-06-11 18:50:26)
> diff --git a/Documentation/devicetree/bindings/display/msm/dp-sc7180.yaml b/Documentation/devicetree/bindings/display/msm/dp-sc7180.yaml
> new file mode 100644
> index 000000000000..5fdb9153df00
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/display/msm/dp-sc7180.yaml
> @@ -0,0 +1,142 @@
> + data-lanes = <0 1>;
> +
> + ports {
> + #address-cells = <1>;
> + #size-cells = <0>;
> +
> + port@0 {
> + reg = <0>;
> + dp_in: endpoint {
> + remote-endpoint = <&dpu_intf0_out>;
> + };
> + };
> +
> + port@1 {
> + reg = <1>;
> + dp_out: endpoint {

Just curious what is eventually connected here? This is possibly a
question for Rob Herring, but I can't figure out how we're supposed to
connect this to the USB type-c connector that is receiving the DP
signal. Does the type-c connector binding support connecting to this end
of the graph? Or should this connect to the DP phy and then the phy
connects to the USB type-c connector node? Right now it is empty which
seems wrong.

> + };
> + };
> + };
> + };

\
 
 \ /
  Last update: 2020-06-16 13:15    [W:0.098 / U:0.644 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site