lkml.org 
[lkml]   [2020]   [Jun]   [12]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
From
Date
SubjectRe: [PATCH v6 1/5] dt-bindings: msm/dp: add bindings of DP/DP-PLL driver for Snapdragon
On Thu, Jun 11, 2020 at 7:51 PM Tanmay Shah <tanmay@codeaurora.org> wrote:
>
> From: Chandan Uddaraju <chandanu@codeaurora.org>
>
> Add bindings for Snapdragon DisplayPort controller driver.
>
> Changes in V2:
> Provide details about sel-gpio
>
> Changes in V4:
> Provide details about max dp lanes
> Change the commit text
>
> Changes in V5:
> moved dp.txt to yaml file
>
> Changes in v6:
> - Squash all AUX LUT properties into one pattern Property
> - Make aux-cfg[0-9]-settings properties optional
> - Remove PLL/PHY bindings from DP controller dts
> - Add DP clocks description
> - Remove _clk suffix from clock names
> - Rename pixel clock to stream_pixel
> - Remove redundant bindings (GPIO, PHY, HDCP clock, etc..)
> - Fix indentation
> - Add Display Port as interface of DPU in DPU bindings
> and add port mapping accordingly.
>
> Signed-off-by: Chandan Uddaraju <chandanu@codeaurora.org>
> Signed-off-by: Vara Reddy <varar@codeaurora.org>
> Signed-off-by: Tanmay Shah <tanmay@codeaurora.org>
> ---
> .../bindings/display/msm/dp-sc7180.yaml | 142 ++++++++++++++++++
> .../devicetree/bindings/display/msm/dpu.txt | 8 +
> 2 files changed, 150 insertions(+)
> create mode 100644 Documentation/devicetree/bindings/display/msm/dp-sc7180.yaml

Is it too much to ask for Qualcomm to coordinate your work? I'm not
going to do that for you. This conflicts with "[v4] dt-bindings: msm:
disp: add yaml schemas for DPU and DSI bindings".

> diff --git a/Documentation/devicetree/bindings/display/msm/dp-sc7180.yaml b/Documentation/devicetree/bindings/display/msm/dp-sc7180.yaml
> new file mode 100644
> index 000000000000..5fdb9153df00
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/display/msm/dp-sc7180.yaml
> @@ -0,0 +1,142 @@
> +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)

Extra space.

> +%YAML 1.2
> +---
> +$id: http://devicetree.org/schemas/display/msm/dp-sc7180.yaml#
> +$schema: http://devicetree.org/meta-schemas/core.yaml#
> +
> +title: Qualcomm Display Port Controller.
> +
> +maintainers:
> + - Chandan Uddaraju <chandanu@codeaurora.org>
> + - Vara Reddy <varar@codeaurora.org>
> + - Tanmay Shah <tanmay@codeaurora.org>
> +
> +description: |
> + Device tree bindings for MSM Display Port which supports DP host controllers
> + that are compatible with VESA Display Port interface specification.
> +
> +properties:
> + compatible:
> + items:
> + - const: qcom,dp-display

That's what the h/w reference manual calls this? It should be SoC specific.

> +
> + cell-index:
> + description: Specifies the controller instance.

Pretty sure I already said no to this.

> +
> + reg:
> + items:
> + - description: DP controller registers

Just: 'maxItems: 1'

> +
> + interrupts:
> + description: The interrupt signal from the DP block.

How many?

The description is useless. That's every 'interrupts'.

> +
> + clocks:
> + description: List of clock specifiers for clocks needed by the device.

That's every 'clocks' property. Drop.

> + items:
> + - description: Display Port AUX clock
> + - description: Display Port Link clock
> + - description: Link interface clock between DP and PHY
> + - description: Display Port Pixel clock
> + - description: Root clock generator for pixel clock
> +
> + clock-names:
> + description: |
> + Device clock names in the same order as mentioned in clocks property.
> + The required clocks are mentioned below.

Drop.

> + items:
> + - const: core_aux
> + - const: ctrl_link
> + - const: ctrl_link_iface
> + - const: stream_pixel
> + - const: pixel_rcg

blank line

> + "#clock-cells":
> + const: 1
> +
> + vdda-1p2-supply:
> + description: phandle to vdda 1.2V regulator node.
> +
> + vdda-0p9-supply:
> + description: phandle to vdda 0.9V regulator node.
> +
> + data-lanes = <0 1>:

Err, what?!

> + type: object

This is a DT node?

> + description: Maximum number of lanes that can be used for Display port.
> +
> + ports:
> + description: |
> + Contains display port controller endpoint subnode.
> + remote-endpoint: |
> + For port@0, set to phandle of the connected panel/bridge's
> + input endpoint. For port@1, set to the DPU interface output.

Look at other schemas and see how they are done.

> + Documentation/devicetree/bindings/graph.txt and
> + Documentation/devicetree/bindings/media/video-interfaces.txt.
> +
> +patternProperties:
> + "^aux-cfg([0-9])-settings$":
> + type: object

This is a DT node?

> + description: |
> + Specifies the DP AUX configuration [0-9] settings.
> + The first entry in this array corresponds to the register offset
> + within DP AUX, while the remaining entries indicate the
> + programmable values.
> +
> +required:
> + - compatible
> + - cell-index
> + - reg
> + - interrupts
> + - clocks
> + - clock-names
> + - vdda-1p2-supply
> + - vdda-0p9-supply
> + - data-lanes
> + - ports

Add:
additionalProperties: false

> +
> +examples:
> + - |
> + #include <dt-bindings/interrupt-controller/arm-gic.h>
> + #include <dt-bindings/clock/qcom,dispcc-sdm845.h>
> + #include <dt-bindings/clock/qcom,gcc-sdm845.h>
> + msm_dp: displayport-controller@ae90000{
> + compatible = "qcom,dp-display";
> + cell-index = <0>;
> + reg = <0 0xae90000 0 0x1400>;
> + reg-names = "dp_controller";
> +
> + interrupt-parent = <&display_subsystem>;
> + interrupts = <12 0>;
> +
> + clocks = <&dispcc DISP_CC_MDSS_DP_AUX_CLK>,
> + <&dispcc DISP_CC_MDSS_DP_LINK_CLK>,
> + <&dispcc DISP_CC_MDSS_DP_LINK_INTF_CLK>,
> + <&dispcc DISP_CC_MDSS_DP_PIXEL_CLK>,
> + <&dispcc DISP_CC_MDSS_DP_PIXEL_CLK_SRC>;
> + clock-names = "core_aux",
> + "ctrl_link",
> + "ctrl_link_iface", "stream_pixel",
> + "pixel_rcg";
> + #clock-cells = <1>;
> +
> + vdda-1p2-supply = <&vreg_l3c_1p2>;
> + vdda-0p9-supply = <&vreg_l4a_0p8>;
> +
> + data-lanes = <0 1>;
> +
> + ports {
> + #address-cells = <1>;
> + #size-cells = <0>;
> +
> + port@0 {
> + reg = <0>;
> + dp_in: endpoint {
> + remote-endpoint = <&dpu_intf0_out>;
> + };
> + };
> +
> + port@1 {
> + reg = <1>;
> + dp_out: endpoint {
> + };
> + };
> + };
> + };
> diff --git a/Documentation/devicetree/bindings/display/msm/dpu.txt b/Documentation/devicetree/bindings/display/msm/dpu.txt
> index 551ae26f60da..30c8ab479b02 100644
> --- a/Documentation/devicetree/bindings/display/msm/dpu.txt
> +++ b/Documentation/devicetree/bindings/display/msm/dpu.txt
> @@ -65,6 +65,7 @@ Required properties:
>
> Port 0 -> DPU_INTF1 (DSI1)
> Port 1 -> DPU_INTF2 (DSI2)
> + Port 2 -> DPU_INTF0 (DP)
>
> Optional properties:
> - assigned-clocks: list of clock specifiers for clocks needing rate assignment
> @@ -136,6 +137,13 @@ Example:
> remote-endpoint = <&dsi1_in>;
> };
> };
> +
> + port@2 {
> + reg = <2>;
> + dpu_intf0_out: endpoint {
> + remote-endpoint = <&dp_in>;
> + };
> + };
> };
> };
> };
> --
> The Qualcomm Innovation Center, Inc. is a member of the Code Aurora Forum,
> a Linux Foundation Collaborative Project
>

\
 
 \ /
  Last update: 2020-06-12 18:23    [W:0.117 / U:0.916 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site