lkml.org 
[lkml]   [2020]   [Jun]   [16]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
From
SubjectRe: [PATCH 1/5] dt-bindings: fpga: xilinx-slave-serial: valid for the 7 Series too
On Thu, Jun 11, 2020 at 11:11:40PM +0200, Luca Ceresoli wrote:
> The Xilinx 7-series uses the same protocol, mention that.
>
> Signed-off-by: Luca Ceresoli <luca@lucaceresoli.net>
Acked-by: Moritz Fischer <mdf@kernel.org>
> ---
> .../devicetree/bindings/fpga/xilinx-slave-serial.txt | 9 ++++++---
> 1 file changed, 6 insertions(+), 3 deletions(-)
>
> diff --git a/Documentation/devicetree/bindings/fpga/xilinx-slave-serial.txt b/Documentation/devicetree/bindings/fpga/xilinx-slave-serial.txt
> index cfa4ed42b62f..9f103f3872e8 100644
> --- a/Documentation/devicetree/bindings/fpga/xilinx-slave-serial.txt
> +++ b/Documentation/devicetree/bindings/fpga/xilinx-slave-serial.txt
> @@ -1,11 +1,14 @@
> Xilinx Slave Serial SPI FPGA Manager
>
> -Xilinx Spartan-6 FPGAs support a method of loading the bitstream over
> -what is referred to as "slave serial" interface.
> +Xilinx Spartan-6 and 7 Series FPGAs support a method of loading the
> +bitstream over what is referred to as "slave serial" interface.
> The slave serial link is not technically SPI, and might require extra
> circuits in order to play nicely with other SPI slaves on the same bus.
>
> -See https://www.xilinx.com/support/documentation/user_guides/ug380.pdf
> +See:
> +- https://www.xilinx.com/support/documentation/user_guides/ug380.pdf
> +- https://www.xilinx.com/support/documentation/user_guides/ug470_7Series_Config.pdf
> +- https://www.xilinx.com/support/documentation/application_notes/xapp583-fpga-configuration.pdf
>
> Required properties:
> - compatible: should contain "xlnx,fpga-slave-serial"
> --
> 2.27.0
>

\
 
 \ /
  Last update: 2020-06-16 06:42    [W:0.101 / U:1.336 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site