lkml.org 
[lkml]   [2020]   [Jun]   [16]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
From
Date
SubjectRe: [PATCH v4 4/5] dm: pci: Assign controller device node to root bridge
Hi Nicolas,

On Tue, 16 Jun 2020 at 08:09, Nicolas Saenz Julienne
<nsaenzjulienne@suse.de> wrote:
>
> On Tue, 2020-06-16 at 07:43 -0600, Simon Glass wrote:
> > Hi Nicolas,
> >
> > On Fri, 12 Jun 2020 at 10:47, Nicolas Saenz Julienne
> > <nsaenzjulienne@suse.de> wrote:
> > > There is no distinction in DT between the PCI controller device and the
> > > root bridge, whereas such distinction exists from dm's perspective. Make
> > > sure the root bridge ofnode is assigned to the controller's platform
> > > device node.
> > >
> > > This permits setups like this to work correctly:
> > >
> > > pcie {
> > > compatible = "...";
> > > ...
> > > dev {
> > > reg = <0 0 0 0 0>;
> > > ...
> > > };
> > > };
> > >
> > > Without this the dev node is assigned to the root bridge and the
> > > actual device search starts one level lower than expected.
> > >
> > > Signed-off-by: Nicolas Saenz Julienne <nsaenzjulienne@suse.de>
> > > ---
> > > drivers/pci/pci-uclass.c | 15 ++++++++++++++-
> > > 1 file changed, 14 insertions(+), 1 deletion(-)
> >
> > Can you update the tests to handle this case please?
>
> I'd be glad to, but I'm not familiar with the test FW in u-booy, coud give me
> some pointers on where/how to test this?
>

Yes it is at test/dm/pci.c and the device tree is test.dts

'make qcheck' to run all tests. To run one test, build for sandbox and
then something like

u-boot -T -c "ut dm pci_swapcase"

for example.

You can perhaps use an existing PCI controller in test.dts but feel
free to add one more if you need it for your test. Make sure that you
don't break other tests.

Regards,
Simon

\
 
 \ /
  Last update: 2020-06-17 01:33    [W:0.057 / U:0.016 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site